Details2007 - 2012 GM Truck Backup Camera VSS Adaptor Use this adapter to connect your backup camera to the factory navigation in your 2007-2012 (non-hard drive radio) GM truck or SUV that did not come from the factory with navigation. If you had navigation from the factory and are just adding a backup camera you need part # CS-VSS1
- Additional Information
SKU CS-GMVSS2 Wiring Type Factory Plug&Play System Manufacturer EVI Systems Connection Plug and Play to Factory Dash Display
2007-2012 non-hard drive radio - GM trucks that did not have navigation from the factory but was added later. This is the harness you need if you purchased a factory navigation system and it did not come with the brown VSS connector with camera input.
Comes with the full brown VSS connector so it simply plugs right in. If you have a hard drive radio (2012 or newer) contact us for the correct harness.
- Installation Information
Plugs into the VSS slot in the back of your navigation receiver. Contains a female RCA plug so that you can plug a backup camera into the factory navigation screen.
NOTE: you will still need to have your navigation flashed for a backup camera by your local GM dealer. The flashing process is what changes your navigation into camera mode when in reverse. Watch the video below to learn how to flash your GM radio for rear camera.
Watch the following video to see how to install the VSS1 connector as part of our GM truck camera installation video below: