Camera Kit for 10-13 Tundra, OE fit, Gentex 332 Mirror
This is an OEM fit Tundra backup camera kit that is plug and play with your factory wiring both front and back! Don't spend $1500 on a camera kit from Toyota when you can have an OEM kit for a fraction the price! This kit utilizes our ultra clear super CMOS camera in a factory Tundra OEM handle. We bundle it with a factory rear harness and Gentex GENK-332 auto-dimming video mirror - best part is that it is plug and play into your existing wiring, making the installation time less than 30 minutes! Finally see what is behind your vehicle while keeping your truck OEM!
- Factory Toyota tailgate camera handle, aftermarket handle, or camera module only (options)
- Camera Source Super CMOS night vision camera - Latest camera technology for the ultimate in color, contrast, and clarity!
- Gentex GENK-332 auto-dimming video mirror with 3.3" LCD screen
- OEM integration front harness - plug and play
- OEM integration rear harness - plug right into your factory wiring harness
- Zip ties
- Super CMOS chip - outstanding color, contrast, and clarity!
- 170 degree view
- Optional parking guidelines - turn them off on the harness if you don't want them
- 600 TV lines of resolution
- .2 lux minimum illumination - Outstanding night vision!
This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch! Save $$$hundreds$$$ over a factory kit and get a better quality camera!
This camera kit comes with a limited 3 year warranty! Mirror comes with 5 year factory warranty!
|Vehicle Interface||Includes Rearview Mirror|
|Waterproof/Dustproof Level||IP 67|
|Night Vision||< .2 Lux|
|Power Supply||12 Volts|
|Wiring Type||Factory Plug&Play|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Camera Orientation||Rear Facing|
|Fit Type||Factory OE Fit Replacement|
|Sensor Type||Super CMOS|
|Viewing Angle||170 Degrees|
|Camera Input Ports||1|
|Mirror Mount||Wedge Style|
|I'm Looking For:||Rear Camera|
|Reason for Shopping||Adding the camera(s)|
|For a monitor it uses:||Packaged w/Rear view mirror display|
2010-2013 Tundra - Select the desired handle configuration from the box above when ordering.
NOTE: Not all 2012-2013 Tundras are pre-wired for camera from the factory. The factory camera connector will always be on the rear frame rail but there can be a missing intermediate harness that prevents the camera signal from reaching the overhead console connector. To be certain you are prewired you will need to run a continuity test between the 4 wires in the rear camera connector and the connector behind the overhead center console. If you do not get continuity order the full harness version of this kit from our online catalog.
If you purchase just the camera module you will install our camera module into your camera-ready handle using the included bolts, route the harness through the bottom of tailgate and plug in on the frame rail. This will only bolt into a factory or aftermarket handle with the OEM camera opening. You can not drill a hole and make this system work.
If you purchase in a handle simply replace your existing tailgate handle with this handle containing the integrated backup camera. Two 10mm bolts hold your handle in place, swap the lock, fish the camera wire through the tailgate, plug in to your chassis, and reassemble. The entire camera installation process can take less than 20 minutes.
Replace your factory mirror with the included Gentex mirror by removing the upper center console, remove the old mirror, swap with the new mirror, plug into the existing harness, and reassemble! - another 15-20 minutes.