The Transit is a workhorse but it can be extremely difficult to see behind the vehicle while backing . To ensure the safety of those around you and protect your liability this is a simple addition that could pay for itself in no time! The kit comes with a high quality CCD camera, 5" digital LCD monitor, and wiring harnesses.
- OEM casing license plate light with integrated camera
- DC 12v
- 1/3" SONY CCD camera for a sharp image
- Parking guidelines
- 728 x 582 pixels
- .1 LUX minimum illumination
- 520 TVL
- 170 degree viewing angle
- IP67 waterproof
- 1 year warranty!
The 5" digital monitor has an ultra clear picture and comes with everything you need to install. The mount is a standard dash mount bracket.
- screen size: 5 inch (diagonal length)
- 16:9 wide screen display
- 3 way video 2 way audio inputs
- PAL & NTSC auto switching
- Power supply: DC 12V compatible
- Built in speakers
- Remote control
- OSD menu
- Coax connector input and 1 RCA A/V connector input (both are included)
- Additional Information
SKU CS-TRANSIT-5 Cam Only/Complete Kit Complete Kit Screen Resolution 800x480 Video Input Type 4 pin locking, 1 RCA conversion harness included Number of Triggers 3 Video System NTSC Bracket Type OE fit, replaces license plate light assembly / monitor is flush mount steel bracket Waterproof/Dustproof Level IP 67 Night Vision .1 Lux Power Supply 12 Volts Sound Options Without Microphone Number of Cameras 1 Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Monitor Size 5" Camera Resolution 500 TVL Parking Guidelines Yes Camera Orientation Rear Facing Fit Type Factory OE Fit Replacement Connection Aftermarket Display (RCA) Sensor Type CCD Sensor Brand Sony Viewing Angle 170 Degrees Includes Remote Yes Camera Input Ports 3 Audio Input Ports 2 Warranty 1 Year Limited
2009-2018 Ford Transit cargo and passenger, Transit Connect.
- Installation Information
Replace your right license plate light assembly with this assembly that is preloaded with a high quality CCD camera. The camera power wire should be connected to a reverse light if you only want the camera for reversing or an accessory power source if you want the camera on at any time. The monitor can also be wired directly to an accessory or to reverse power if it will only be used for reversing. The included RCA cable is 25' long and will get you to the front of the vehicle where you will plug into the included monitor.