Camera Source is not currently experiencing any shipping delays due to COVID-19.

Toyota Multi Camera Video Interface for Display Radios

Tacoma Multi-Cam Support!



Email to a Friend





Now you can easily add multiple cameras to your late model Toyota (see application tab) without having to cut and splice your factory wiring* (see note below).  Control module allows for factory camera or aftermarket rear camera and two side cameras (or use one of the side camera ports for a front camera).  If used as side cameras they are automatically activated through the turn signal circuit so when you signal left or right the respective camera will display automatically.  The rear camera will come on in reverse automatically.


If configuring one side camera as a front camera you will need to wire the trigger through a toggle switch (not included) instead of the turn signal circuit.


System comes with the following:

  • Control box
  • Factory 16 pin and 24 pin radio integration harness
  • Factory T-harness for power distribution
  • Instructions


No cameras or monitor is included with this kit.  System is designed to use your non-nav factory Display Radio!


*Requires splicing into the factory turn signal wires if using auto side camera functionality.

Additional Information

Additional Information

Vehicle Interface Includes Factory Integration Module
System Manufacturer EVI Systems
Connection Plug and Play to Factory Dash Display
Camera Input Ports 3
Warranty 1 Year Limited

Works on the following Toyota with display radios:


2012-13 Camry LCD radio For non-nav models
2014-2014.5/2017 Camry LCD radio For non-nav models
2012-17 Scion Bespoke radio For non-nav models
2013-17 Corolla 6.1" For non-nav models
2013-17 Matrix 6.1" For non-nav models
2013-17 Tacoma 6.1" For non-nav models
2013-17 Tundra 7.0" For non-nav models
2013-17 RAV4 6.1" For non-nav models
2013-17 Highlander 6.1" For non-nav models
2013-17 Sequoia 6.1" For non-nav models
2012-2017 4 Runner 6.1" For non-nav models
2012-2017 Prius C/V/Gen2 6.1" For non-nav models
Installation Information
Remove radio, connectors are plug and play with factory radio connector. Requires splicing into factory turn signal circuit if using as a side camera or blind spot camera system.