2016+ F150 Front, Rear, and Side Camera Kit for SYNC 3

For SYNC 3 -See all 4 sides of the vehicle!



* Required Fields


Email to a Friend



This is a complete kit that contains our aftermarket Ford tailgate handle rear camera, surface mount front camera, two side cameras, and multi-camera integration module for SYNC 3.

Compatible with 2016-2018 Ford F-150 trucks with factory SYNC 3 radio.
This kit allows you to see what is directly in front of truck, behind the truck, and both sides!  This kit does not require any splicing into factory wiring and will work on any 2016-18 F-150 truck with SYNC 3 . The integration module allows for plug and play integration into your factory screen without having the dealer flash program your radio. The rear camera will come on automatically when in reverse and front camera will come on when you shift from reverse to drive or you can manually activate it by pressing the Camera icon on the display. The side cameras get installed under your side mirrors to give you a full view of your typical blind spots - all automatically activated using your turn signals! 

Because of the complexity of the side mirror disassembly professional installation is recommended.

Kit includes:

  • Chrome or black plated metal grille surface mount camera with our latest super CMOS camera - the latest camera technology!
  • Two side cameras (mount under your side mirrors) with brackets
  • Rear Tailgate Handle Camera Kit with pre-mounted camera
  • Multi-cam interface for SYNC 3
  • 12 volt power module
  • Mounting hardware
  • Camera wiring harnesses
  • Zip ties
  • Detailed installation instructions
  • 3 year warranty on the cameras and 1 year on interface module

Camera Specifications:

  • Super CMOS chip - outstanding color, contrast, and clarity!
  • Forward looking camera - designed for front applications
  • Side cameras are designed for rear-view applications and can be fully adjusted to meet your view needs
  • 160 degree view
  • 600 TV lines of resolution
  • .5 lux night vision  

Multi Cam interface: 

  • Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph(shuts off at 2-3mph) or manually using your factory display touchscreen.
  • Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. 
  • Tailgate camera and/or Reverse-triggered bed-view/cargo camera. Can also be manually powered on.
  • Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
  • Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active.  Doesn't interrupt any factory features!

The integration module is completely plug and play with your factory SYNC 3 system.  Allows connection of five cameras total to the factory screen.  Also, allows monitoring of any connected camera at any time while driving(not including factory tailgate camera).  Right and left blind spot camera inputs are automatically triggered by the turn signals.  Easy to use menus in the factory screen with operation choices.

This kit allows you to see what is directly in front of truck, behind the truck, and both sides.  These cameras come with a 3 year warranty and the interface module has a 1 year warranty.  Professional installation is recommended.

Radio not included. Grille not included.




Additional Information

Additional Information

Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .5 Lux
Power Supply 12 Volts
Number of Cameras 4
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Viewing Angle 160 Degrees
Camera Input Ports 5
Warranty 3 Year Limited

This kit is compatible with select Ford 8” SYNC 3 factory displays. 

-2016-2018 Ford F150

Not compatible with the standard XLT grille at this time due to the upward slop of the grille cross members.  Mounting the camera on the XLT grille will result in undesireable results due to this upward slope.

NOTE:  You cannot use the CS-FTRF emblem camera kit because the factory blue oval is no longer removable from the existing grille.  This camera is a surface mount model that gets mounted on the cross member above the blue oval as shown in the photos.





Installation Information

The side cameras will mount under your side mirrors, which will require complete removal and disassembly of your mirrors.  These mirrors can be challenging to disassemble so professional installation is recommended for this kit.

Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included.

The rear camera kit will replace your factory tailgate handle.

The Multi-cam integration module is plug and play with your factory 8" SYNC 3 radio.

The 12 volt power module connects directly to the battery and all camera power wires connect directly to the power module. 

You will need to remove your factory 8" SYNC 3 screen to gain access to the back of the connections. The module will be plug and play and stubs out to a RCA for the camera to connect directly to the screen.







Q & A

Q:  Do you recommend using brackets for the side cameras?

A:  You will want to use brackets for mounting your side camera if you don't have a level surface under the mirror mount. A downward taper in your mirror mount will cause the camera to have a downward view and in some cases it cannot be overcome with the amount of camera adjustment available. This bracket will solve that problem. Also, it will allow for a rearward view if mounting on the side surface of the vehicle.