2017+ Super Duty w/ 360 view-Commercial Trailer Cam-On Demand

Activate cameras at anytime!

SKU: CS-FTRSK-17SD-TRL-OD

$679.00

* Required Fields

$679.00

Email to a Friend

Description

Details

This is a plug and play camera kit that will allow you to add a trailer camera to your 2017+ Ford Super Duty truck that has the 360 degree view system from the factory plus unlock all other 360 view cameras to allow them to be viewed at any speed.  
 
This kit is designed to add a rear camera to the back of your travel trailer or 5th wheel!  This comes in handy when you have a trailer behind the truck since the rear of the trailer is a serious blind spot!  This kit is designed to solve that problem by adding the second rear camera on the rear of the truck or trailer.  Comes with everything you need to install the camera on the rear of the trailer.  Simply mount the camera on any surface and run a plug and play harness to the 12 pin auxiliary camera plug under your spare tire.
The included Camera on Demand module is plug and play with your factory 8" display with SYNC 3.   
SYNC 3 version 3.0 or higher will allow the turn signals to activate the side cameras turning them into blindspot cameras!
Your truck will only have the 12 pin auxiliary plug under the spare tire if the truck has the 5 cam/360 degree/bird's eye view system from the factory. 
 
Kit includes the following:
  • Heavy duty commercial camera with Sony CCD sensor
  • OEM to commercial coax conversion harness
  • 32' coaxial wire harness with weather tight connectors (unless 64' option selected above)
  • Camera harness has factory ends for plug and play with your existing wiring
  • Camera on Demand module
  • One year warranty!
 
Camera Specifications:
  • Sony Ultra CCD for a really clear image
  • 19 infra-red LED's that will create a daytime like display even in complete darkness
  • 150 degree view
  • 700 TV lines of resolution
  • 0 lux (no light required to operate)
  • Heavy cast casing, steel mounting bracket and steel sun shield
  • Locking weather tight connector

Click HERE to see a video of the install!   

360 Surround View-Camera On Demand Specs: 

  • Surround view cameras to be displayed on demand, without lock-out restrictions. 
  • Activate factory turn signal cameras* turning cameras into blind spot cameras 
  • Force factory rear cam
  • Force factory front cam
  • Force trailer camera 
  • Last known camera retention (from hard camera button press). 
NOTE: This kit will NOT program any camera system. This module is only intended for use in SuperDuty trucks equipped with the OEM trailer package (5-camera system).
* Vehicle must have Sync 3 version 3.0 or above to enable the turn camera feature.  Display not included.
**Choose the cable length from the drop down above. 
***Choose "Reverse" image camera if you want the image to be mirrored.  Choose "Front facing" image for the camera if you will be mounting it in the bed of the truck and want the image to be non-mirrored.
Additional Information

Additional Information

SKU CS-FTRSK-17SD-TRL-OD
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision 0 Lux
Power Supply 12 Volts
Number of Cameras 1
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 700 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Plug and Play to Factory Dash Display
Sensor Type CCD
Sensor Brand Sony
Viewing Angle 150 Degrees
Warranty 1 Year Limited
Compatibility

2017+ Ford Super Duty trucks- F250, F350, F450, F550 with the 5 camera/360 degree/birds eye view system from the factory.

Your truck will only have the 12 pin auxillary camera plug under the spare tire if the truck has the 360 degree/bird's eye view system from the factory.

NOTE:  The camera does not provide a 360 degree view. * Vehicle must have Sync 3 version 3.0 or above to enable the turn camera feature. 

Installation Information
Camera installs virtually anywhere. Power is run to the camera through the coaxial cable so it is not necessary to locate power on the trailer or area where the camera is mounted.
 
This kit allows you to add a trailer camera to your 2017+ Ford Super Duty factory 8" SYNC 3 radio that has the 360 degree view system from the factory.  All plug and play - no cutting of factory wires! Harness plugs into the 12 pin trailer/auxiliary camera connection located under your spare tire. 
On Demand camera interface module is plug and play with your factory SYNC 3 display. 
**Choose "Reverse" image camera if you want the image to be mirrored.  Choose "Front facing" image for the camera if you will be mounting it in the bed of the truck and want the image to be non-mirrored. 
Click HERE to see a video of the install. 
Q & A

Q:  Where do I plug this camera in?

A:  On the 2017 Super Duty with the 360 view system there is a 12 pin female connection that is tucked up under the spare tire.  You may need to lower the spare tire to get to it.

Q:  Do I have to have the 360 view system on my truck for this kit to work?

A:  Yes, The 2017+ Super Duty trucks with the 360 view option are the only trucks that have this plug available.

Q: Can I use the camera to check behind the trailer while going down the road?

A: The interface module included with this kit allows cameras to be activated at any speed.

Q:  What are the camera dimensions? (with bracket)

A:  3" L x 2 1/2" W x 3" H