5th Wheel, Trailer, Camper Camera Kit for Ford SYNC 3

5th wheel camera for Ford SYNC 3

SKU: CS-UTC-CK8S3

$677.00
$677.00
OR

Email to a Friend

Description

Details

This kit is designed to add a rear camera to the back of your travel trailer or 5th wheel!  This comes in handy when you have a trailer behind the truck since the rear of the trailer is a serious blind spot!  This kit is designed to solve that problem by adding the second rear camera on the rear of the truck or trailer.  Comes with everything you need to install the camera on the rear of the trailer and run a 4 pin coax to the cab to connect to your factory SYNC 3 display.

This kit includes our 5th wheel trailer quick disconnect system allowing you to disconnect your trailer with ease by making the camera connections as simple as unplugging the lights of the trailer. 

Kit includes:

  • Commercial grade night vision camera with 700 TV lines of resolution Sony CCD sensor (CS-UCCD-SONY)
  • Multi cam interface for SYNC 3 - connect up to 4 cameras in addition to your OEM camera (radio not included)
  • 64' length 4 pin coaxial weather proof cable (CS-UC20)
  • 32' length 4 pin coaxial weather proof cable (CS-UC10)
  • Trailer quick disconnect system for easy camera connections - weather tight! (CS-UTQC)
  • 4 pin male to RCA conversion harness so that you can connect to your Lockpick or universal monitor easily (CS-RCA-4PIN-M)
  • 12 Volt power module
  • All connections are weather tight except those made inside the cab!
  • 1 Year warranty on camera and interface

SYNC 3 Interface module features:

  • Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph(shuts off at 2-3mph) or manually using your factory display touchscreen.
  • Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. (cams not included) 
  • Reverse-triggered bed-view/cargo camera. Can also be manually powered on.
  • Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
  • Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active.  Doesn't interrupt any factory features!
  • NO DEALER ACTIVATION REQUIRED!
The integration module is completely plug and play with your factory SYNC 3 system.  Allows connection of four cameras to the factory screen in addition to the OEM backup camera. Also, allows monitoring of any connected camera at any time while driving (not including OEM backup camera).  Right and left blind spot camera inputs are automatically triggered by the turn signals.  Easy to use menus in the factory screen with operation choices.  Factory rear camera is not available above 7 mph.
1 year warranty on camera and interface module!
Radio not included. Additional cameras not included.

 

Additional Information

Additional Information

SKU CS-UTC-CK8S3
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision 0 Lux
Power Supply 12 Volts
Number of Cameras 1
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Camera Resolution 700 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Plug and Play to Factory Dash Display
Sensor Type CCD
Sensor Brand Sony
Viewing Angle 150 Degrees
Warranty 1 Year Limited
Compatibility

This kit is compatible with Ford 8” SYNC 3 factory displays.

Not compatible with trucks that have the 360 degree view system.

-2016-2018 Ford F-Series trucks. F150, F250, F350, F450, F550

 

Installation Information

Camera installs virtually anywhere. Power to the camera is run through the coaxial cable so it is not necessary to locate power on the trailer or area where the camera is mounted.

The interface module plugs into the back of your factory navigation screen, and the cameras connect to the interface module.  Connect the 12 volt power module to the battery.  Connect harness to 12 volt power module.  The instructions walk you through the entire installation process.