10-13 Tacoma Mirror to Radio Camera Conversion
Tired of squinting to see your backup camera image on your tiny mirror screen in your 2013 Tacoma? Convert that tiny display into a big display by moving the camera output to your factory installed Toyota Display Audio radio!
This harness will allow you to move the camera display from your factory video mirror to the radio display on your 2013 Tacoma. Everything you need is included and the process is pretty simple with the instructions walking you through each step. Don't settle for that small display when you can utilize the large radio screen for your camera. Increase resale of your vehicle, sell your factory display mirror and replace with an auto-dimming mirror - this kit pays for itself!
NOTE: the parking guidelines are a function of your rear view mirror and will not move to the radio. The large screen more than makes up for the loss of this feature as it becomes much easier to see objects etc. If you would really like to keep the parking guideline feature you will need to replace your camera with our CS-14TAC camera module, which has the lines built in.
|Wiring Type||Factory Plug&Play|
|System Manufacturer||EVI Systems|
|Connection||Plug and Play to Factory Dash Display|
2010-2013 Toyota Tacoma with Display Audio or Entune factory touch screen radio.
This harness plugs right into the back of your radio, then route to a factory connector located by the fuse panel area. You will need a reverse activated power source to trigger the radio to camera mode when in reverse but the instructions explain where to tap power in detail... 1 hour or less installation time.