07-09 Tundra Flush Mount Camper Plug & Play Camera Kit

In Stock
SKU:
CS-7TUN-FM
Rating:
100% of 100
$199.00
 
07-09 Tundra Flush Mount Camper Plug & Play Camera Kit is available to buy in increments of 1

Camera is FMVSS 111 compliant!  This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!

 This universal camera mounts flush with a flat surface.  Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.

 

Kit includes the following:

  • Black rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
  • OEM conversion harness-approx 6 feet of wiring total  
  • 22.5 mm hole saw
  • Zip ties
  • Installation instructions
  • 3 year limited camera warranty

Camera Specifications:

    • Super CMOS chip - outstanding color, contrast, and clarity!
    • Removable parking guidelines
    • 170 degree view
    • 600 TV lines of resolution
    • .1 lux minimum illumination - Outstanding night vision!

More Information
SKU CS-7TUN-FM
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision < .2 Lux
Power Supply 6 Volts
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year
I'm Looking For: Rear Camera
For a monitor it uses: Your factory display

2007-2009 Tundra with factory camera wiring.

 

 

 

Camera requires a 22.5 mm hole on a flat 1" X 1" surface for flush mounting.  Drill the hole and connect the camera harness to the OEM conversion harness.  Run the cable to your factory backup camera connection under the truck and plug it in.
There is approximately 6' of wire between the camera and the factory connector.
Create a review here

  • Write Your Own Question