2017+ Super Duty Cab and Chassis Commercial Camera

Easily add to a Super Duty cab and chassis!



* Required Fields


Email to a Friend



This kit is for Cab and Chassis vehicles only and these are rare so chances are you need the non-Cab and Chassis version.  See the compatibility tab for details before purchasing this kit.  This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a 4.2" or 8" factory display that is already programmed for a camera.  Your truck must be prewired and programmed for a camera or this kit will not work. Please see the compatibility tab for more information! 


Use this camera for cab and chassis trucks that did not come with a bed from the factory. Simply mount the camera on any flat surface and run the cable to your factory backup camera connection for a simple and seamless installation.  Choose the cable length from the drop down above.

*Factory radio must be programmed for a back up camera from the factory or by a dealership.  If it hasn't been programmed see SKU: CS-17SDSK-CCP.  CS-17SDSK-CCP includes a programmer.


Kit includes the following:

  • Heavy duty commercial camera with Sony CCD sensor
  • OEM to commercial coax conversion harness-plug and play!
  • Coaxial wire harness with weather tight connectors (select length above)
  • Camera harness has factory ends for plug and play with your existing wiring.
  • 1 year camera warranty!

Camera Specifications:

  • Sony Ultra CCD for a really clear image
  • 19 infra-red LED's that will create a daytime like display even in complete darkness
  • 150 degree view
  • 700 TV lines of resolution
  • 0 lux (no light required to operate)
  • Heavy cast casing, steel mounting bracket and steel sunshield
  • Locking weather tight connector

**Not compatible with Super Duty trucks that have the 360 degree view system**  See CS-FTRSK-17SD-TRL.

Additional Information

Additional Information

Agriculture / Commercial Commercial
Cam Only/Complete Kit Complete Kit
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision 0 Lux
Power Supply 12 Volts
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type CCD
Viewing Angle 150 Degrees
Warranty 1 Year Limited

2017+ Ford Super Duty F350, F450, F550 cab and chassis trucks that have been pre-wired for a camera from the factory and have a 4.2" or 8" display from the factory. 

This kit relies on the factory camera chassis harness to operate.  

Not compatible if your truck has the 360 view system.

See our other Super Duty truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate.  This kit will only work on the trucks that came from the factory without a bed.  Please verify the connector shown in the photos against the connector on your truck before ordering.  If you are still not sure please call us for assistance.









Installation Information

Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required!  Plug OEM adapter harness into the factory camera harness under the truck.

-Factory radio must be pre-programmed from the factory or a dealership for this camera kit to work.  Or see SKU: CS-17SDSK-CCP for a kit that includes a programmer.






Q & A

Q:  How do I know if the radio is programmed for a camera?

A:  When you put the truck in reverse the radio display should change.  The display should show a warning that states "Check surroundings" or "Camera not available".  If the display stays in radio mode when the vehicle is in reverse you know it hasn't been programmed for a camera and will either need to take it to a dealership for programming or order one of our kits that already includes the OBD programmer.