F150, Superduty Plug & Play Rear Surface Cam Kit

Uses factory camera connector under tailgate!

SKU: CS-FTRSK-RSM

$199.00

* Required Fields

$199.00

Email to a Friend

Description

Details

Camera is FMVSS 111 compliant!  This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing surface mount camera!

 

This universal camera is surface mounted so it will require a flat section approximately 1" x 1" for mounting.  Drill a small hole and run the cable through to your factory backup camera connection. 

 

Kit includes the following:

  • Chrome or black plated rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
  • Mounting hardware
  • OEM conversion harness (NOTE: Super Duty trucks (F250-F350) require a special harness so please select Super Duty above if applicable. 2017+ F450-F550 please call to order )
  • 5', 10', 25' cable lengths available.  Select from drop down above.
  • Zip ties
  • Installation instructions
  • 3 year limited camera warranty

Camera Specifications:

    • Super CMOS chip - outstanding color, contrast, and clarity!
    • Removable parking guidelines
    • 170 degree view
    • 600 TV lines of resolution
    • .1 lux minimum illumination - Outstanding night vision!

**Not compatible with trucks that have the 360 surround view system**

 

Additional Information

Additional Information

SKU CS-FTRSK-RSM
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision .1 Lux
Power Supply 12 Volts
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year Limited
Compatibility

Ford F series truck with a factory installed backup camera. This kit relies on the factory camera chassis harness to operate.  Not compatible if your truck has the 360 view system.

F-150: 2008-2019

**If your F150 has an automatic lowering tailgate that can be activated with your key fob, be sure to select the Automatic Lowering Tailgate option when ordering.  The connector for the camera is different for trucks with this option.  Note:  The automatic lowering and power locking tailgate feature is disabled when using this kit as it is intended for applications where the tailgate is completely removed.

Super Duty F250-F350: 2008-2019

Super Duty F450-F550:  2017+ Please call to order.

**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA).  Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01.  FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance. 

 

 

 

 

 

 

Installation Information

Camera is drill-in style for surface mounting.  It will require a flat section approximately 1" x 1" for mounting.  Drill a small hole and connect the camera harness to the OEM conversion harness.  Run the cable to your factory backup camera connection under the truck and plug it in.

 

 

 

 

 

Q & A

Q: I have a front camera on my Raptor. Will my front camera still work when I use this camera in place of my factory rear camera?

A: Unfortunately, no. The factory rear camera has a lead that completes the camera circuit and your front camera will not work unless the factory rear camera is connected. This camper camera will work fine but you will lose the front camera functionality.

 

Q: I have the factory 360 surround view camera system. Will this kit work?

A:  This kit is not compatible if your truck has the factory 360 surround view system.  We do have specific kits for trucks with the 360 surround view option.  Please see our other kits for details.