GM Truck Plug & Play Flush Mount Cam Kit

Uses factory camera connector under tailgate!

SKU: CS-GMTRSK-FM

$199.00

* Required Fields

$199.00

Email to a Friend

Description

Details

Camera is FMVSS 111 compliant!  This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!

 

This universal camera mounts flush with a flat surface.  Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection. 

 

Kit includes the following:

  • Black plated rear facing flush mount camera with our latest super CMOS camera - the latest camera technology!
  • OEM conversion harness
  • 5', 10', 25' cable lengths available- Select from drop down above.
  • Zip ties
  • 22.5 mm Hole saw
  • Installation instructions
  • 3 year limited camera warranty

Camera Specifications:

  • Super CMOS chip - outstanding color, contrast, and clarity!
  • Removable parking guidelines
  • 170 degree view
  • 600 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!

Additional Information

Additional Information

SKU CS-GMTRSK-FM
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision .1 Lux
Power Supply 12 Volts
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year Limited
Compatibility

2010-2013 GMC Sierra and Chevrolet Silverado and 2010-2014 HD series truck with a factory installed backup camera

2014-2015 GMC Sierra and Chevrolet Silverado truck with a factory installed backup camera.

2016-2018 GMC Sierra and Chevrolet Silverado truck with a factory installed backup camera.

2019 GMC Sierra and Chevrolet Silverado 2500,3500 HD series with a factory installed backup camera.  Not compatible with 2019 1500 series.

 Be sure to select the correct model year from the dropdown menu when ordering to ensure you receive the correct plug and play harness for your truck.

**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA).  Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01.  FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance. 

 

 

 

 

 

Installation Information

Camera requires a 22.5 mm hole on a flat surface for flush mounting.  It will require a flat section approximately 1" x 1" for mounting.  Drill the hole and connect the camera harness to the OEM conversion harness.  Run the cable to your factory backup camera connection under the truck and plug it in.

There is approximately 6' of wire between the camera and the factory connector.