**3rd brake light camera not compatible if vehicle has a factory tailgate camera** This kit is perfect if you have an aftermarket back up camera and are looking to add a 3rd brake light camera.
This kit displays the bed camera on the factory display radio (please see notes below and application guide for fitment). This a complete replacement third brake light that fits like factory and has a rear camera integrated into the housing! Now you can see your fifth wheel or anything else that is inside your bed without having to have a spotter guiding you for trailer connections etc. Brake light functions like factory and the camera connects to the included screen integration module, which allows this 3rd light cam, an aftermarket tailgate camera, and two more cameras to be connected to your factory radio simultaneously. (additional cams not included)
Some notes about this integration kit:
- 3RD BRAKE LIGHT CAMERA WILL NOT WORK IF YOU HAVE A FACTORY TAILGATE CAMERA.
- Kit includes switch that allows up to 4 cameras to connect to factory display radio.
- Works on all 4.3", 5", or 8.4" North American display radios 2013-2018 model years
- Integration module is plug and play, no dealer programming necessary. If integrating into turn signal circuit for side cameras some splicing is required
- Connect side cameras and have them activate with the turn signals (manual splicing is required if this option is selected)
- OEM grade 3rd brake light housing/light assembly with integrated camera
- HD CMOS, high resolution color and night vision
- Adjustable view, swivel head allows you to aim the camera where needed
- 500 TV Lines of resolution
- 150 degree view
- <.2 LUX night vision
- 3 Year warranty
- Additional Information
SKU CS-DTR3L-VI Vehicle Interface Includes Factory Integration Module Waterproof/Dustproof Level IP67 Night Vision < .2 Lux Power Supply 12 Volts Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Camera Resolution 500 TVL Camera Orientation Rear Facing Fit Type Factory OE Fit Replacement Connection RCA with opt. Factory Interface Sensor Type CMOS Sensor Brand EVI Systems Viewing Angle 150 Degrees Warranty 3 Year Limited
2013-2018 RAM trucks with factory 4", 5", or 8.4" screen.
3rd brake light camera is not compatible with trucks that have a factory tailgate camera.
- Installation Information
Remove your factory 3rd brake light and replace with this kit. Remove the radio and install the integration module and video switcher into the factory wiring, this part is plug and play. Route the camera wiring harness to the integration module and make power/video connections at the integration module. Follow easy programming instructions and the installation is complete!
NOTE: If you intend to add 2 side cameras with this kit you will need to splice into the factory turn signal circuit for side camera automatic activation.