2009-16 Super Duty Plug & Play Replacement Emblem Cam Module

Replaces a broken factory camera!



* Required Fields


Email to a Friend



Did your tailgate get stolen? Does your factory camera no longer function? Are you looking for an affordable alternative to a factory camera for collision repair? This is your kit!


This camera is a high quality aftermarket replacement to Ford part number FC3Z-19G490-B, or FC3Z-19G490-C.  This camera module will fit in your factory tailgate emblem housing and plug into the factory harness, just like a factory camera would. This camera uses a Super CMOS sensor so the picture quality is crisp, clear, and colorful just like your factory camera was! In fact, we even replicated the factory parking guidelines so you can continue to utilize that feature for added safety and convenience.


You can also purchase this kit with a replacement tailgate emblem or with the entire housing/emblem assembly in case yours was damaged or stolen.  NOTE: HOUSING IN PHOTO IS NOT INCLUDED UNLESS YOU CHOOSE HOUSING OPTION ABOVE.


NOTE about the options above: if you are replacing a burned out camera you will need the emblem as the original will be damaged when you remove it to gain access to the camera. If your tailgate was stolen you will need the housing and the emblem. In this case the camera will be pre-mounted in the housing for you. This kit comes with the following components:

  • Camera Source Super CMOS camera module designed to fit the factory Ford housing and plugs into existing factory Ford harness
  • Optional - complete OEM Ford housing assembly (if this option is Selected the camera will be pre-mounted)
  • Optional - replacement OEM Ford emblem

Camera Details:

  • Super CMOS - 600 TV lines of resolution - the best available and only from Camera Source
  • Factory parking guidelines in the display
  • 170 degree view
  • .1 minimum lux night vision
  • 3 year warranty! Don't pay big bucks at your Ford dealer to replace your camera when you can do it yourself for a fraction of the price! 


NOTE:  The factory zoom feature will be disabled with this camera.


NOTE:  This camera will not mount into tailgate handles so it is not a suitable replacement for handle camera applications.

Additional Information

Additional Information

Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision .1 Lux
Power Supply 12 Volts
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Yes
Camera Orientation Rear Facing
Fit Type Factory OE Fit Replacement
Connection Factory Connector
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year Limited

2009-2016 Super Duty trucks with factory backup camera in the emblem. This kit will not work on trucks that did not come from the factory with a backup camera.  The wiring harness is specifically designed for Super Duty as it is different from F150.  Be sure to select the correct model year for your truck when ordering.


In mid 2013 Ford did an update on the housing and emblem design so that the emblem can be removed without breaking it.  In addition the new emblem has less tendency to fade like the original one did.  That being said if you have a mid year 2013 or older we recommend getting the entire housing/emblem assembly so that the new camera fits tight and everything goes together as it should.





Installation Information

Simply remove the old Ford emblem from your tailgate by gently prying the emblem from the base. Remove the two screws holding the base to the tailgate and it will expose the screws holding the factory camera in place. Disconnect the wire harness under the bumper and remove the camera from the housing, pulling the wire from the tailgate. Drop the new wire through the tailgate and install the camera in reverse order from the way it was removed. Plug the camera into the factory harness and screw the housing back on the tailgate. Once the camera has been tested replace the factory emblem... SIMPLE!


NOTE:  If you have a mid 2013 or older you will likely break the tabs on the emblem when removing it.  See the compatibility tab in this product page to learn about housing and emblem replacement.