2015-17 F150 Front & Rear Camera Kit for 4.2" Displays

Front & rear cams for 4.2" Displays!

SKU: EVI-R15FTRH-42FR

$653.00

* Required Fields

$653.00

Email to a Friend

Description

Details

This is a complete kit that contains our aftermarket Ford tailgate handle rear camera, surface mount front camera, and MyFord 4.2 integration module. Compatible with 2015-17 Ford F-150 trucks with factory 4.2" MyFord radio system.

Here's a complete solution for your Ford truck that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This kit does not require any spicing into factory wiring and will work on any 2015-2017 Lariat or XL Ford F-150 with 4.2" MyFord screen. The integration module allows for plug and play integration into your factory screen without having to flash program your radio. The rear camera will come on automatically when in reverse and front camera can be manually activated using the OK button on your steering wheel.  Auto-activation using a front sensor (not included) is also available see below.  

 

This kit contains the following:

  • CS-R15FTRH-42 Rear Camera Kit (with parking lines)
  • CS-FTRFSM Front Camera Kit (with parking lines)
  • 4.2 integration module (4.2" Ford radio screen not included)
  • 5CS-CAP- Curb Alert Park View Pro (optional) 

Add our Curb Alert Park View Pro to your order and you can activate the front camera automatically without pressing any switches (part number 5CS-CAP).  Curb Alert Park View Pro senses the space available and turns on a front camera in addition to providing a quick three-beep audible alert. The camera automatically activates when the sensor picks up an approaching curb or garage wall. You’ll see a front camera view of whatever is in front of your vehicle on your existing factory display radio and the system will display the parking view for 10 seconds giving you ample time to park.

Additional Information

Additional Information

SKU EVI-R15FTRH-42FR
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .5 Lux
Power Supply 12 Volts
Number of Cameras 2
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Viewing Angle 160 Degrees
Camera Input Ports 2
Warranty 3 Year Limited
Compatibility

2015-2017 F-150 Lariat or XL pickup truck with 4.2" display screen.  Not compatible with the XLT front grille as the camera requires a flat 1"x1" section for mounting that is not tapered or angled up or down.  Mounting on the XLT will result in an undesirable camera view due to the upward angle of the cross members in the grille.

 

 

 

 

 

 

 

Installation Information

Replace your existing tailgate handle and replace with the new handle with pre-mounted camera.  

Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience).

You will need to remove your factory 4.2" screen to gain access to the back of the connections. The module will be plug and play and stubs out an RCA for the camera to connect directly to the screen.  The interface module powers the cameras (no need to splice into factory wiring) and programs the radio for the cameras.