2015 F150 Front & Rear Camera Kit for 8" Displays

Front & rear cams for 8" integration!



* Required Fields


Email to a Friend



This is a complete kit that contains our aftermarket Ford tailgate handle rear camera, surface mount front camera, and MyFord Touch 8" SYNC 2 radio multi-camera integration module. Compatible with 2015 Ford F-150 trucks with factory MyFord Touch 8" SYNC 2  radio.

Here's a complete solution for your Ford truck that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This kit does not require any splicing into factory wiring and will work on any 2015 Ford truck with an 8" MyFord Touch SYNC 2 screen . The integration module allows for plug and play integration into your factory screen without having the dealer program your radio. The rear camera will come on automatically when in reverse and front camera will come on when you shift from reverse to drive or you can manually activate it using steering wheel controls.  Factory rear camera not available above speeds of 7mph.  


This kit contains the following:

  • 2015 Rear Tailgate Aftermarket Handle Camera Kit (parking lines in display - no black center line)
  • CS-FTRFSM Front Camera Kit - surface mount camera, easy install and available in black or chrome (parking lines)
  • 8" multi cam interface - connect up to 4 cameras


Everything has a 3 year limited warranty!

Additional Information

Additional Information

Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .5 Lux
Power Supply 12 Volts
Number of Cameras 2
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Yes
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Viewing Angle 160 Degrees
Camera Input Ports 4
Warranty 3 Year Limited

2015 F-150 pickup truck with 8" MyFord Touch SYNC 2 screen display.








Installation Information

The Multi-cam integration module is plug and play with your factory MyFord Touch 8" SYNC 2 radio.  You will need to remove your factory 8" screen to gain access to the back of the connections. The module will be plug and play and stubs out to a RCA for the camera to connect directly to the screen.  The interface module powers the cameras and also programs the radio.  No cutting of factory wiring and easy programming!

The rear camera kit will replace your factory tailgate handle.  

Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience).