2015 F150 Backup Camera for 8.4" Factory Display's

OEM handle with cam and multi-cam interface!



Email to a Friend



This is a OEM backup camera solution for your new style Ford F-150 truck with 8.4" MyFord Touch radio display screen!  This will fit the new generation 2015+ F-150 pickup trucks as a direct factory replacement handle with pre-mounted OEM camera.  This kit will look like it was installed at the factory, but cost you a fraction of the price! This system is plug and play, does not require dealer programming, and camera will see the rear bumper and hitch in the display.


Kit includes:

  • 8.4" Factory display interface module - plug and play and no dealer flashing required! (Display not included)
  • Factory Ford tailgate handle with camera premounted - black textured surface
  • OEM Ford camera with night vision premounted in handle
  • Wiring harness with quick tailgate disconnect and weather pack connectors for a tight water resistant connection. This ensures your wiring is protected, all electrical connections can be made inside the cab to avoid corrosion, and the tailgate can be unplugged with ease!
  • Wire connectors
  • Zip ties
  • Detailed installation instructions

Camera Specifications:

  • Authentic Ford OEM CCD camera
  • 640 x 480 aspect ratio
  • 500 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!
  • NOTE: Some displays will not show the black center guideline.  The parking guidelines will show red, yellow, green lines on all models.

MyTouch Multi Cam interface: 

  • Uses existing 8” MyFord Touch SYNC 2 factory display -screen not included
  • Allows addition of front camera that can be manually triggered using your radio power button. (Sold separately)
  • Also add side cameras with turn signal activation-(Sold separately)
  • Pass through for existing factory backup camera
  • Shuts off front video at speeds over 7mph. Factory rear camera not available at speeds over 7 mph.
  • Press power button on radio to manually activate cameras, then tap power button again to toggle between them

This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch! 


No monitor is included with this kit as it is designed to work with your existing 8.4" radio screen.  This camera comes with a 1 year warranty and is guaranteed to fit or your money back. Professional installation is recommended.

Additional Information

Additional Information

Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .1 Lux
Power Supply 12 Volts
Wiring Type Hard Wired Full Harness
System Manufacturer Brand Motion
Camera Resolution 500 TVL
Parking Guidelines Yes
Camera Orientation Rear Facing
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type CCD
Viewing Angle 170 Degrees
Camera Input Ports 3
Warranty 1 Year Limited

2015 F-150 pickup truck with 8.4" display screen.

Installation Information

This is a direct replacement for your factory tailgate handle.  The integration module will allow a direct plug and play connection to the back of the 8.4" radio screen for a simple install and a factory look!