This is an affordable aftermarket camera solution for your new style Ford F-150 truck with 8" SYNC 2 or 3 radio display screen! (Display not included) This will fit the new generation 2015+ F-150 pickup trucks as a direct factory replacement handle with pre-mounted CMOS camera! The kit includes the radio programmer tool so you can turn on the camera function quickly and easily! Optional 12 Volt power source available to eliminate the hassle of locating a power source on the vehicle and avoid cutting or splicing into factory wiring! See related items SKU: CS-RPW and CS-RPW-P
- OBD2 Programming module for 8" factory radio screens - turn on the factory camera function in minutes without having to take your truck to the dealer!
- Factory OEM Ford tailgate handle with camera premounted - black textured surface without light/keyhole
- 25' Wiring harness with quick tailgate disconnect for simple tailgate removal. This ensures your wiring is protected, all electrical connections can be made inside the cab to avoid corrosion, and the tailgate can be unplugged with ease!
- Navigation interface harness
- Wire connectors
- Zip ties
- Detailed installation instructions
- Authentic OEM Ford factory camera
- High definition, high contrast image
- CMOS color camera
- Parking gridlines
- 1 Lux for illumination & sharper image
- 640 x 480 camera aspect ratio
- 9 - 24 volt operating range
- Color image w/ automatic white balance
- Electronic auto iris
- Waterproof case w/ anti-fog lens
This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch!
No monitor is included with this kit as it is designed to work with your existing 8" factory radio screen. This camera comes with a 1 year warranty, Professional installation is recommended.
- Additional Information
SKU CS-15FTRH-OBD8S3 Video System NTSC Waterproof/Dustproof Level IP 67 Night Vision .3 Lux Power Supply 12 Volts Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Camera Resolution 480 TVL Parking Guidelines Selectable on/off Camera Orientation Rear Facing Fit Type Factory OE Fit Replacement Connection Plug and Play to Factory Dash Display Sensor Type CMOS III Viewing Angle 160 Degrees Warranty 1 Year Limited
2015-2018 F-150 pickup truck with 8" display screen.
- Installation Information
SImply install the rear tailgate handle from this kit in place of your existing handle, route the harness through the bottom of the tailgate, along the frame and up into the cab.The wire harness has a single point weather resistant connection that connects to the camera near the spare tire under the truck - allows for easy tailgate removal! The harness is 25' long so all connections can be made inside the cab. The camera video connection plugs into a T-harness (included) that plugs into the back of your factory 8" display. Connect the red power wire to a 12 volt reverse power source and ground the black wire to a clean piece of metal on the frame. Optional 12 Volt power source available to eliminate the hassle of locating a power source on the vehicle and avoid cutting or splicing into factory wiring! See related items SKU: CS-RPW and CS-RPW-P
Next plug the OBD Genie into your truck's ODBII port under the steering column to program the radio.