2016+ F150 OEM Handle with Camera, SYNC 3

Multi-cam interface and OEM handle with cam for SYNC 3!



Email to a Friend



This is an OEM backup camera solution for your new style Ford F-150 truck with the SYNC 3 radio display screen!  This will fit 2016-18 F-150 pickup trucks as a direct factory replacement handle with pre-mounted OEM camera.  This kit will look like it was installed at the factory, but cost you a fraction of the price! This system does not require dealer programming, and the camera will see the rear bumper and hitch in the display.


Kit includes:

  • Multi-cam Interface module for SYNC 3 - plug and play with factory display and no dealer flashing required!
  • Factory Ford tailgate handle with camera premounted - black textured surface
  • OEM Ford camera with night vision premounted in handle
  • Wiring harness with quick tailgate disconnect and weather pack connectors for a tight water resistant connection. This ensures your wiring is protected, all electrical connections can be made inside the cab to avoid corrosion, and the tailgate can be unplugged with ease!
  • 12 Volt power module
  • Wire connectors
  • Zip ties
  • Detailed installation instructions

Camera Specifications:

  • Authentic Ford OEM CCD camera
  • 640 x 480 aspect ratio
  • 500 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!
  • Factory Ford backup guidelines (These are the red, yellow, green lines on the screen) NOTE: the black centering line is not available with this camera.

SYNC 3 Multi Cam interface: 

  • Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph(shuts off at 2-3mph) or manually using your factory display touchscreen.
  • Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. 
  • Reverse-triggered bed-view/cargo camera. Can also be manually powered on.
  • Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
  • Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active.  Doesn't interrupt any factory features!
  • 1 year warranty

The integration module is completely plug and play with your factory SYNC 3 system.  Allows connection of five cameras total to the factory screen.  Also, allows monitoring of any connected camera at any time while driving.(not including factory OEM camera)  Right and left blind spot camera inputs are automatically triggered by the turn signals.  Easy to use menus in the factory screen with operation choices. 

This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch! 

No monitor is included with this kit as it is designed to work with your existing 8" SYNC 3 radio screen.  Additional cameras not included. The camera and interface module come with a 1 year warranty and are guaranteed to fit or your money back. Professional installation is recommended.

Additional Information

Additional Information

Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .1 Lux
Power Supply 12 Volts
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Camera Resolution 500 TVL
Parking Guidelines Yes
Camera Orientation Rear Facing
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type CMOS
Viewing Angle 170 Degrees
Camera Input Ports 5
Warranty 1 Year Limited

The 8" interface module is compatible with SYNC 3 displays in the following vehicles:

-2016-2018-  F150


Installation Information

Install the rear tailgate handle from this kit in place of your existing handle, route the harness through the bottom of the tailgate, along the frame and up into the cab.  The wire harness terminates with RCA connection to plug into the multi-cam interface module.

The interface module will allow a direct plug and play connection to the back of the factory SYNC 3 radio screen!  It does require you to remove the radio in order to install.


Q & A

Q:  What is the difference between SKU: CS-R15FTRH-8S3 and this kit, SKU: CS-FTRHO-8S3?

A:  SKU: CS-R15FTRH-8S3 is an aftermarket handle and CS-FTRHO-8S3 is an OEM Ford handle.  The SYNC 3 interface module is the same for both kits.