Here's a complete solution for your Ford truck that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This is a complete kit that contains our Ford tailgate handle rear camera, front camera(surface mount or license plate), and SYNC 3 multi-camera integration module. Compatible with 2016-2018 Ford F-150 trucks with factory 8" SYNC 3 radio.
This kit contains the following:
- Rear Tailgate Handle Camera Kit (parking lines in display - no black center line)
- Front Camera Options:
CS-ULPM Universal camera- Install on either your license plate mount or on any flat surface - comes with two brackets.
- SYNC 3 multi cam interface - connect up to 5 cameras total
Interface module features:
- Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph(shuts off at 2-3mph) or manually using your factory display touchscreen.
- Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. (cams not included)
- Reverse-triggered bed-view/cargo camera. Can also be manually powered on. (cam not included)
- Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
- Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active. Doesn't interrupt any factory features!
- NO DEALER ACTIVATION REQUIRED!
The integration module is completely plug and play with your factory SYNC 3 system. Allows connection of five cameras total to the factory screen. Also, allows monitoring of any connected camera at any time while driving.(Not including OEM tailgate camera) Right and left blind spot camera inputs are automatically triggered by the turn signals. Easy to use menus in the factory screen with operation choices.
3 year warranty on cameras and 1 year warranty on interface module!
Radio not included. Additional cameras not included.
- Additional Information
SKU EVI-EFTRH-FR8S3 Video System NTSC Vehicle Interface Includes Factory Integration Module Waterproof/Dustproof Level IP 67 Night Vision .5 Lux Power Supply 12 Volts Number of Cameras 2 Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Camera Resolution 600 TVL Parking Guidelines Selectable on/off Fit Type Factory OE Fit Replacement Connection Plug and Play to Factory Dash Display Sensor Type Super CMOS Viewing Angle 160 Degrees Camera Input Ports 5 Warranty 3 Year Limited
This kit is compatible with Ford 8” SYNC 3 factory displays.
-2016-2018 Ford F150
- Installation Information
The Multi-cam integration module is plug and play with your factory 8" SYNC 3 radio. You will need to remove your factory 8" SYNC 3 screen to gain access to the back of the connections. The module will be plug and play and stubs out to a RCA for the camera to connect directly to the screen.
The rear camera kit will replace your factory tailgate handle. Run the harness along the frame up into the cab to connect to the integration module.
Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall.
Connect 12 volt power module directly to the battery. Connect all camera power wires directly to the power module.