This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a 4.2" or 8" factory display. Your truck must be prewired for a camera or this kit will not work. Please see the compatibility tab for more information!
Use this camera for cab and chassis trucks that did not come with a bed from the factory. Simply mount the camera on any flat surface and run the cable to your factory backup camera connection for a simple and seamless installation. Choose the cable length from the drop down above.
The kit also comes with the radio programmer tool so you can turn on the camera function quickly and easily- without having to go to a dealer!
Kit includes the following:
- Heavy duty commercial camera with Sony CCD sensor
- OEM to commercial coax conversion harness-plug and play!
- Coaxial wire harness with weather tight connectors (select length above)
- Camera harness has factory ends for plug and play with your existing wiring.
- OBD programmer for 4.2" or 8" factory display. Select screen size above.
- Sony Ultra CCD for a really clear image
- 19 infra-red LED's that will create a daytime like display even in complete darkness
- 150 degree view
- 700 TV lines of resolution
- 0 lux (no light required to operate)
- Heavy cast casing, steel mounting bracket and steel sunsheild
- Locking weather tight connector
- 1 year camera warranty!
**Not compatible with Super Duty trucks that have the 360 degree view system** See CS-FTRSK-17SD-TRL.
- Additional Information
SKU CS-17SDSK-CCP Agriculture / Commercial Commercial Cam Only/Complete Kit Complete Kit Video System NTSC Waterproof/Dustproof Level IP 67 Night Vision 0 Lux Power Supply 12 Volts Number of Cameras 1 Wiring Type Factory Plug&Play System Manufacturer EVI Systems Camera Resolution 600 TVL Parking Guidelines Not Available Camera Orientation Rear Facing Fit Type Universal fit Connection Factory Connector Sensor Type CCD Viewing Angle 150 Degrees Warranty 1 Year Limited
2017+ Ford Super Duty F350, F450, F550 cab and chassis trucks that have been pre-wired for a camera from the factory and have a 4.2" or 8" display from the factory.
This kit relies on the factory camera chassis harness to operate.
Not compatible if your truck has the 360 view system.
See our other Super Duty truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate.
- Installation Information
Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required! Plug OEM adapter harness into the factory camera harness under the truck.
Plug the OBD programmer into the OBD port. Programming takes less than a minute!