This will fit any Ford F150,F250,F350 with the large blue oval in the center of the tailgate (2005 and up). Replace your existing blue oval with this factory Ford emblem kit bundled with our entry level CMOS camera for a kit that will look like it was installed at the factory, but cost you a fraction of the price! This camera will see the rear bumper and hitch in the display. This kit is offered to our budget limited customers as a lower-cost alternative to our premium camera kit (CS-FTRa). Compare this kit to competitor kits, as well as our premium kit (use our website compare feature to see differences):
- CMOS III sensor with night vision
- 150 degree view
- 480 TV lines of resolution
- Distance guidelines (These are the red, yellow, green lines with the black centering line on the screen)
- RCA integrated harness so it will work with any aftermarket monitor
- This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch! Save $$$hundreds$$$ over a factory kit!
No monitor or mirror is included in this kit but you can bundle a monitor at a discounted price from the drop down box above.
See SKU: CS-FTRa-MOD if you are replacing a burned out factory camera.
- This camera comes with a 1 year limited warranty and is guaranteed to fit or your money back. Professional installation is recommended.
- Additional Information
SKU CS-FTR1-EG Video System NTSC Vehicle Interface Not Included Waterproof/Dustproof Level IP 67 Night Vision .5 Lux Power Supply 12 Volts Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Camera Resolution 480 TVL Parking Guidelines Yes Camera Orientation Rear Facing Fit Type Factory OE Fit Replacement Connection Aftermarket Display (RCA) Sensor Type CMOS III Viewing Angle 150 Degrees Warranty 1 Year Limited
2004 (some), 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015* Ford F-150, F-250, F-350, F-450, F-550 with large blue oval in the center of the tailgate.
Also will fit Sport Trac and Flex models with the large blue oval in the center of the liftgate/tailgate.
This is not a replacement for a burned out factory camera. See SKU: CS-FTRa-MOD for an aftermarket replacement for your factory camera.
This kit is designed to replace your existing blue oval.
- Installation Information
This camera can be connected to any aftermarket monitor with an RCA input. An interface module is required if connecting to your factory navigation - we stock 'em so have a look at our online catalog to find the package price!
Your factory tailgate blue oval is held on with two sided tape, use a heat gun and fishing line to work the old emblem off the surface of the tailgate. On older models you will need to drill an access hole for the camera to pass through the surface of the tailgate - drilling template included. You may also need to drill a hole in the back of your bed for the camera harness to pass through. The instructions walk you through the entire installation process step-by-step.