Ford Universal backup camera with OBD Programmer for 8" Display

No dealer programming required!

SKU: CS-ULPM-F2T8G

$342.00

* Required Fields

$342.00

Email to a Friend

Description

Details

This is a high quality OEM integrated backup camera solution for several Ford vehicles that integrates right into the factory display screen! This kit is plug and play into the back of the screen!  In addition, no dealer programming is required making this a simple OEM integrated solution for your vehicle  The camera can be mounted on the license plate or it also comes with a mini mount that will allow you to mount the camera to the ledge above the license plate if you choose.  Optional 12 Volt power source available to avoid the hassle of locating a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related items at the bottom of the page. SKU:  CS-RPW and CS-RPW-P

 

The kit comes with the following:

  • Dual mount camera system with high grade Super CMOS sensor for an ultra clear view, mount on license plate or lip mount as desired
  • Full chassis harness
  • Ford Sync integration harness(compatible with SYNC 2 or SYNC 3)
  • OBD programming module
  • Required mounting hardware/connectors

Camera Specifications:

  • Camera Source exclusive Super CMOS high grade sensor with night vision
  • Selectable parking guidelines (can be turned off if desired)  NOTE: Black center line is not present on actual display
  • 600 TV lines of resolution
  • <.2 lux minimum illumination - Outstanding night vision!
  • 170 degree viewing angle

System has a 3 year warranty!  **Monitor not included.**

Additional Information

Additional Information

SKU CS-ULPM-F2T8G
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .3 Lux
Power Supply 12 Volts
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Plug and Play to Factory Dash Display
Sensor Type CMOS III
Viewing Angle 170 Degrees
Warranty 3 Year Limited
Compatibility

Compatible with the listed vehicles that have the 8" SYNC 2 or SYNC 3 screen. 

C-Max 2013-2018
Edge 2011-2018
Escape 2013-2018
Expedition 2015-2018
Explorer/Sport Trac 2011-2018
Flex 2013-2018
Focus 2012-2018
Fusion 2013-2018
MKC 2015-2018
MKS 2013-2018
MKT 2013-2018
MKX 2011-2018
MKZ 2013-2018
Mustang 2015-2018
Taurus 2013-2018

Installation Information

Install on either your license plate mount or on any flat surface - comes with two brackets. The RCA cable will run inside the vehicle to the back of your factory display and you will need a reverse activated 12v power source and ground wire. Optional 12 Volt power source available to avoid the hassle of locating a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related items at the bottom of the page. SKU:  CS-RPW and CS-RPW-P

Install the RCA T-Harness to the back of your factory 8" SYNC display. Connect the RCA from the main chassis harness to the T-Harness.

Plug the OBD programmer into the OBD port under the steering wheel and programming is completed in less than a minute!

 

NO DEALER ACTIVATION REQUIRED