2007-2016 Sprinter Premium OE Fit 3rd Brake Light Camera w 3.5" Monitor

Includes 3.5" Monitor



Email to a Friend



Not all sprinter cameras are the same as this kit provides the ultimate in clarity by using a next generation HD CMOS image sensor with 700 TV lines of resolution!  We take the OE third brake light housing camera mold and couple it with our proprietary camera sensor to create a kit that will give you the best view of behind your Sprinter that is possible, day or night!  This kit comes complete with a 3.5" digital monitor that can be mounted on your dash for a quick and easy install!


This kit contains the following:


  • Sprinter OE fit third brake light assembly with high grade camera preloaded
  • 3.5" Digital monitor with remote
  • 16' Coaxial cable
  • 4 pin to RCA conversion pigtail
  • Power wire with fuse holde
  • Installation instructions
  • 3 year limited replacement warranty


Camera Specifications:


  • 700 TVL resolution
  • 170 degree view
  • IP 68 weather/dustproof
  • IR LED's for clearer night vision, even in complete darkness
  • Optional parking guidelines
  • Rotatable camera housing


Monitor Specifications:

  • screen size: 3.5 inch (diagonal length)
  • 2 video inputs
  • PAL & NTSC auto switching
  • Power supply: DC 12V compatible
  • RCA input

Simply replace your third brake light with this assembly, route the harness to the cab and connect to power supply to the included monitor.  Very simple to install, completely adjustable, and will provide that extra margin of safety that will save you money in the long run!  



Additional Information

Additional Information

Video System NTSC
Vehicle Interface Not Included
Waterproof/Dustproof Level IP68
Night Vision 0 Lux
Power Supply 12 Volts
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Monitor Size 3.5"
Camera Resolution 700 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Factory OE Fit Replacement
Connection Aftermarket Display (RCA)
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year Limited

2007-2016 Sprinter vans

Installation Information

Remove the third brake light lens and replace with this camera assembly. Route the harness to the cab and connect power to 12v reverse activated power or ignition, black to ground, and video RCA to monitor display. The monitor and camera require 12 volt accessory power and ground. In this configuration the monitor and camera can be on at any time. You can also connect the monitor power wire to a 12v reverse power source and the monitor will come on only when in reverse.

Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related item SKU: CS-RPW-P