Now you can add the safety and convenience of a rear camera to your 2013-15 Subaru BR-Z with factory display. This camera kit is designed to plug directly into your factory 6.1" screen so no additional monitor is required. Camera will come on automatically when you go to reverse and provide a crystal clear view of your surroundings both day and night.
This camera is our exclusive Super CMOS model with a high grade image sensor, which produces the best color and clarity you will find in an automotive camera system!
- Subaru 6.1" plug & play display screen interface cable no cutting of factory screen wires
- High grade OE fit camera with Super CMOS high grade sensor
- Full camera wiring harness
- Reverse trigger pin (required for some models)
- Hole saw for camera installation
- Wire connectors for tapping camera power
- Super CMOS night vision sensor
- 600 TVL resolution
- .1 LUX night vision
- Selectable parking lines in the display, turn them off on the harness if desired
- 170 degree viewing angle
- 3 year warranty!
NOTE: Some models require a reverse trigger pin lead to be installed into the main radio harness in order to trigger the radio to reverse camera mode when in reverse gear. This pin and detailed instructions on how to install are included.
- Additional Information
SKU CS-SUBRZ-132 Video System NTSC Vehicle Interface Includes Factory Integration Module Waterproof/Dustproof Level IP67 Night Vision .1 Lux Power Supply 6 Volts Wiring Type Factory Plug&Play System Manufacturer EVI Systems Camera Resolution 600 TVL Parking Guidelines Selectable on/off Camera Orientation Rear Facing Fit Type Factory OE Fit Replacement Connection Plug and Play to Factory Dash Display Sensor Type Super CMOS Viewing Angle 170 Degrees Warranty 3 Year Limited
2013-2015 Subaru BR-Z with factory installed 6.1" LCD screen
- Installation Information
Remove the screen and unplug from factory wiring. Connect included wiring harness to radio and install the reverse trigger pin into the main radio harness (some models). Some models already have the reverse trigger pin installed so that portion of the installation may not be necessary.
Drill a hole in the panel above your license plate using the included hole saw and install camera in opening. Route harness to front of vehicle, connect RCA to radio interface RCA input, and connect power/ground wires to power and ground source.
Click HERE for a video of the install.