10-13 Toyota Tacoma Backup Camera for Factory Radios - Opt. Pop and Lock

6 VOLT Plug & Play into factory display!

SKU: CS-10TAC-TDA

$184.00

* Required Fields

$184.00

Email to a Friend

Description

Details

NEW!  6 VOLT SYSTEM Integrate a rear camera into your Display Audio system 

This new Toyota Tacoma backup camera kit comes with your choice of either a camera module only, or premounted in a PL5500 or PL5400 Pop & Lock locking tailgate handle! In addition, it's completely plug and play with your factory radio. NOTE: some Tacomas are not prewired so please see compatibility tab for more information.
 
Now you can add a backup camera to your Tacoma quickly and easily without any cutting or splicing of wires. This Tacoma camera kit is completely plug and play at the back of the vehicle and uses the preexisting wiring to your factory Display Audio or Entune navigation radio (on factory pre-wired vehicles only). See the compatibility tab for details on vehicle fitment. If you need a Tacoma backup camera kit that will interface an aftermarket radio or OEM mirror see our other items as we have a kit that is sure to fit your needs.
  • Camera module and radio integration harness only (without the Pop and Lock) - choose this option if you want to use your existing tailgate handle
  • Camera pre-loaded in a Pop and Lock PL5500 locking tailgate handle (comes with it's own set of keys)
  • Camera pre-loaded in a Pop and Lock PL5400 locking tailgate handle (uses your ignition key to train the lock tumbler -- no additional keys needed!)

Premium camera kit with an OEM look- high resolution chip for superior quality in color, clarity, and night vision. This camera will also allow you to see the rear bumper and trailer hitch for easy connections - even at night! This camera kit provides the ultimate package in safety and security! Available with a black Pop & Lock PL5500 or PL5400 locking tailgate handle, this combination looks like a factory camera, but outperforms the factory camera in all categories. This kit comes with all the wiring and connectors to install into your truck. Kit is completely plug and play so no need to run a new wiring harness under your chassis... uses your existing wiring!

 

This package contains:

  • Premium day/night vision camera, mounted in PL5500 or PL5400 locking tailgate handle (optional).
  • Toyota rear camera integration tailgate harness
  • Toyota Display Audio interface harness
  • Detailed Installation instructions
  • 3-Year camera warranty!

Additional Information: This camera module will mount in your existing tailgate handle, or if you order the Pop and Lock the tailgate handle assembly and camera replace your existing handle as an exact factory replacement kit. The harness allows for the camera to be connected directly to your Display Audio system so you can view the camera output on your radio when in reverse.

Additional Information

Additional Information

SKU CS-10TAC-TDA
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision < .2 Lux
Power Supply 6 Volts
Wiring Type Factory Plug&Play
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year Limited
Compatibility

2010-2013 Toyota Tacoma with Display Audio radio.

Please ensure your truck is prewired by checking the connector at the passenger side frame rail just in front of the rear bumper. If you have 4 wires in the frame side of this connector then you are prewired. If there is only one wire in this connector that heads toward the cab then you are not prewired and you need to Select the full harness configuration from the drop down above. This full harness config will come with the radio interface harness and a 28' chassis harness that will go from the camera to the radio.
 
NOTE: the 4 wires must run to the cab, not referring to the 4 wires that go into the tailgate.
Installation Information

If you are pre-wired this kit simply plugs in at the frame rail using the tailgate disconnect factory plug. The total install will take 10-15 minutes! 

If you are not pre-wired you will run a new harness to the cab, come through an existing grommet in the floor board, then connect the camera harness to the radio using the included radio interface harness.  This harness simply plugs right in to the radio without any cutting or splicing and this harness will also supply power and ground to the camera, which makes things really simple.  You'll remove your Display Audio Radio and install the radio interface harness as per the instructions. Remove the drivers side A-pillar cover and lower instrument panel cover to gain access to the necessary plugs and cable routing. Connect the included radio harness to the connector inside the A-pillar then route the harness to the back of the radio You will also need to install the included reverse trigger wire into pin 2 of the factory radio bundle to trigger the radio into camera mode when you go to reverse. The total installation time is about 90 minutes or 120 minutes for DIY.

If you order the Pop and Lock you will simply replace the factory handle with the new replacement and then follow the above instructions.