NO CAMERAS ARE INCLUDED WITH THIS KIT.
Now you can easily add multiple cameras to your late model Toyota (see application tab) without having to cut and splice your factory wiring* (see note below). Control module allows for factory camera or aftermarket rear camera and two side cameras (or use one of the side camera ports for a front camera). If used as side cameras they are automatically activated through the turn signal circuit so when you signal left or right the respective camera will display automatically. The rear camera will come on in reverse automatically.
If configuring one side camera as a front camera you will need to wire the trigger through a toggle switch (not included) instead of the turn signal circuit.
System comes with the following:
- Control box
- Factory 16 pin and 24 pin radio integration harness
- Factory T-harness for power distribution
No cameras or monitor is included with this kit. System is designed to use your factory Display Radio!
*Requires splicing into the factory turn signal wires if using auto side camera functionality.
- Additional Information
SKU CS-TOY-VI Vehicle Interface Includes Factory Integration Module System Manufacturer EVI Systems Connection Plug and Play to Factory Dash Display Camera Input Ports 3 Warranty 1 Year Limited
Works on the following Toyota with display radios:
2012-13 Camry LCD radio 2014-2014.5/2015 Camry LCD radio 2012-15 Scion Bespoke radio 2013-15 Corolla 6.1" 2013-15 Matrix 6.1" 2013-15 Tacoma 6.1" 2014-15 Tundra 7.0" 2013-15 RAV4 6.1" 2013-15 Highlander 6.1" 2013-15 Sequoia 6.1" 2013-2015 Sienna 6.1" 2012-2015 4 Runner 6.1" 2012-2015 Prius C/V/Gen2 6.1"
ALSO WORKS ON ABOVE 2016 MODEL YEARS WITHOUT NAVIGATION
- Installation Information
Remove radio, connectors are plug and play with factory radio connector. Requires splicing into factory turn signal circuit if using as a side camera or blind spot camera system.