2016+ Toyota Entune/Display Audio Backup Camera Kit

Plug & Play to factory radio!

SKU: CS-TDA132-16

$149.00
$149.00
OR

Email to a Friend

Description

Details

Toyota backup camera kit for vehicles with Display Audio/Entune touch screen radios - Plugs right in** with no cutting of factory harness! Super CMOS camera for the best picture available!!

 

This backup camera kit is designed for Toyota vehicles with the Display Audio 6.1" non-navigation radio and Entune 6.1" or 7" navigation radios. This includes the following applications:

  • 2016+Avalon
  • 2014.5-2016+ Camry and Corolla
  • 2016+ Prius, Prius C Three and Four, Prius V One Two Three and Five, Prius GEN3 Two Three Four Five
  • 2016+ Matrix
  • 2016+ Venza
  • 2016+ RAV 4

The camera kit is plug and play and will not require you to cut any factory wires to install. The front harness plugs into the factory radio and the full chassis harness runs back to the OE fit rear camera - a quick and simple install! The camera will come on in reverse and will display parking guidelines for added safety and convenience, though the lines can be turned off with the flip of a switch on the harness.

 

Kit includes:

  • Super CMOS OE fit rear camera - ultra high clarity, color, and contrast, 5-7v operating range (a Camera-Source exclusive)
  • Optional parking guidelines - can be turned off on the harness
  • OEM Front integration harness
  • Chassis harness
  • Hole saw for installing camera
  • Zip ties
Additional Information

Additional Information

SKU CS-TDA132-16
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision < .2 Lux
Power Supply 6 Volts
Wiring Type Hard Wired Full Harness
System Manufacturer Camera Source
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year Limited
Compatibility
  • 2016+Avalon
  • 2014.5-2016+ Camry and Corolla
  • 2016+ Prius, Prius C Three and Four, Prius V One Two Three and Five, Prius GEN3 Two Three Four Five
  • 2016+ Matrix
  • 2016+ Venza
  • 2016+ RAV 4
Installation Information

Simply remove the radio and plug the new camera harness into the appropriate slot and run the chassis harness to the rear of the car through the interior. Camera installs in upper lip above the license plate; using the included hole saw cut an opening in the trim, install the camera, tighten with locking nut, and connect to chassis harness. Installs quickly and easily!

 

There is a wire in the chassis harness that will turn the guidelines on or off.