License plate mounted backup camera, Gentex mirror

Includes Gentex GENK-332 mirror

SKU: CS-ULPM-332

$450.00
$450.00
OR

Email to a Friend

Description

Details

Adding a backup camera to ANY car or truck with a standard wedge mount rear view mirror could never be simpler!

 

This CMOS license plate mounted backup camera kit will allow you to integrate rear view safety to any vehicle with a license plate and a wedge mount style mirror. In fact, the camera can be converted to mount on any flat surface! All the cables are included and the 33' long harness terminates with an RCA connection so you can integrate into the included Gentex OEM auto dimming rear view mirror. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off. This camera can also be used as a front camera by simply switching it to a forward looking image on the harness during the installation!

 

Product specifications:

  • Mini license bar universal mount camera
  • Super CMOS sensor for ultra clear display (the best available)
  • Resolution: 600 TV lines
  • Minimum Illumination: 0.2 Lux
  • View Angle: 170
  • Video Output: Full color video 
  • Working Voltage: DC 9-16V
  • Parking Line: On/Off switchable
  • Image: Mirror/Non mirror switchable
  • Water proof: IP67
  • 25 foot harness
  • 3 year warranty on the camera

Gentex GENK-332 specifications:

  • 3.3" High-Definition Color Rear Camera Display 16:9 ratio
  • Auto-Dimming Feature
  • Standard Windshield Wedge Mount
  • 3 year/36,000 mile factory warranty
  • Includes FREE Gentex Wire Cover
  • 5 year warranty!
Additional Information

Additional Information

SKU CS-ULPM-332
Video System NTSC
Vehicle Interface Includes Rearview Mirror
Waterproof/Dustproof Level IP 67
Night Vision < .2 Lux
Power Supply 12 Volts
Number of Cameras 1
Wiring Type Hard Wired Full Harness
System Manufacturer EVI Systems
Monitor Size 3.3"
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Front or Rear Facing
Fit Type Universal fit
Connection Rearview Mirror
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Camera Input Ports 1
Warranty 3 Year Limited
Mirror Options Auto Dim, Video
Mirror Mount Wedge Style
Compatibility
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep. When using parking lines, it is recommended to mount the camera on the centerline of the vehicle.
Installation Information
Install on either your license plate mount or on any flat surface - comes with two brackets. The RCA cable will run inside the vehicle to your monitor and you will need a reverse activated 12v power source and ground wire.