Universal license plate mounted backup camera

In Stock
SKU:
CS-ULPM
$134.00
 
Universal license plate mounted backup camera is available to buy in increments of 1

 Camera is FMVSS 111 compliant!  Adding a backup camera to ANY car or truck could never be simpler!

 

This CMOS license plate mounted backup camera kit will allow you to integrate rear view safety to any vehicle with a license plate. In fact, the camera can be converted to mount on any flat surface! All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into any monitor with an RCA video input. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off. This camera can also be used as a front camera by simply switching it to a forward looking image on the harness during the installation!

 

Product specifications:

  • Mini license bar universal mount camera
  • Current Consumption: MAX:50mA
  • Sensor: SUPER CMOS
  • Resolution: 600 TV lines
  • Minimum Illumination: <0.2 Lux
  • View Angle: 170
  • Working Voltage: DC 9-16V
  • Video Color: Full
  • Parking Line: On/Off switchable
  • Image: Mirror/Non mirror switchable
  • Operating Temperature: -30C to +80C
  • Water proof: IP68
  • 25 foot harness

 

More Information
SKU CS-ULPM
Video System NTSC
Bracket Type License plate mount, also includes universal mount
Vehicle Interface Not Included
Waterproof/Dustproof Level IP 68 Camera
Night Vision < .2 Lux
Power Supply 12 Volts
Wiring Type Hard Wired
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Front or Rear Facing
Fit Type Universal fit
Connection Aftermarket Display (RCA)
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year
I'm Looking For: Rear Camera
Reason for Shopping Adding the camera(s)
For a monitor it uses: Your aftermarket display (RCA)
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep. When using parking lines, it is recommended to mount the camera on the centerline of the vehicle.

Install on either your license plate mount or on any flat surface - comes with two brackets. The RCA cable will run inside the vehicle to your monitor and you will need a reverse activated 12v power source and ground wire.

Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related item SKU: CS-RPW-P

Create a review here

  • Write Your Own Question