Bazooka BPB24-DS Party Bar

Loud tunes and cool lighting!



Email to a Friend



The Bazooka BPB24-DS Party Bar is a marine-grade active soundbar system with built-in Bluetooth, an Aux input, and integrated LEDs. The Party Bar is the perfect audio solution for your ATV or boat.
Double-Sided Array: The Bazooka BPB24-DS Party Bar is double-sided, featuring 10 total speakers (4 firing forward, 4 firing backward, and 2 end loaded woofers). Each side consists of two 1" tweeters and two 2" midrange drivers, along with a 3.5" woofer on each end of the Party Bar.
450W Max Power: The Bazooka Party Bar employs a 450W (Peak) amplifier for loud, dynamic sound performance that can be heard out in the open field or over the open water.
Built-In Bluetooth: The Party Bar offers built-in Bluetooth for hands-free communication (HFP) and wireless audio streaming with control (A2DP/AVRCP). You can pair and connect only one device at a time. If your already paired device comes within range of the Party Bar, the two will automatically reconnect. It has a wireless range of approximately 60'.
Hands-Free Communication: The Party Bar features a built-in microphone and lets you answer/end calls that are incoming from your Bluetooth-enabled smartphone. The callers voice is heard through the soundbar speaker, while you talk into the Party Bar's built-in mic. You will still need to use your smartphone to make a call and then the call will be transferred to the soundbar speaker system.
Wireless Audio Streaming: You can also wirelessly stream stored music and music apps from your Bluetooth enabled source device (like a smartphone or tablet) to the Bazooka Party Bar. You can even control music playback functions like Volume up/down, Play/Pause, and Previous/Next Track from the included remote control. Advanced music navigation and song/artist information must still be done on your Bluetooth enabled smartphone or tablet.
Aux Input: In addition to wireless Bluetooth connectivity, the Party Bar is equipped with a 3.5mm Aux input for connection of practically any portable audio source with an analog or headphone output. The Aux input has a rubber waterproof cap.
Analog Output: The Bazooka Party Bar is also equipped with a 3.5mm analog output to daisy-chain multiple soundbar systems for bigger sound or add a powered subwoofer for extra bass. The analog output has a rubber waterproof cap.
RF Remote Control: The Bazooka BPB24-DS Party Bar comes with an RF remote control for wireless operation of the soundbar speaker system up to 1,000'. The included RF remote will let you wirelessly control Power on/off, Source selection, Volume up/down Bluetooth music playback, and LED illumination.
Integrated RGB LEDs: The Party Bar features a built-in RGB LED illumination system with back lighted tweeters, LED rings in the ends, and a dual LED party strip running along the bottom of the bar. It's capable of flashing multiple colors at any speed; controlled from the RF remote.
Mounting Options: The Bazooka BPB24-DS Party Bar includes universal L-mount brackets for surface mounting the soundbar speaker; it can be mounted on top of a flat surface or suspended from a flat surface. It also features an integrated rail system along the top which can be used with Bazooka's roll bar clamps (PR-FRC175 or PR-FRC200; sold separately) to mount the speaker to a roll bar.
Power Requirements: The Bazooka BPB24-DS Party Bar will require 12-volt power and ground. A 6' power/ground harness with an line 15A fuse is included. A 12' version of this cable is also available (PR-BTP144, sold separately). You can also install an inline switch (PR-ILS16, sold separately); so you can turn the power of the Party Bar on/off and not draw unneeded current from your battery when the vehicle is off. You can even use Bazooka's home power supply adapter (VRPS-12V7A, sold separately) to use the Party Bar around home.

Kit includes:

  • Marine-grade soundbar
  • 74" Power cable (inline 15A fuse)
  • 5" Pigtail adapter cable
  • Remote control (RFR-2)
  • CR2025 3V battery (installed in remote)
  • 2 Mounting brackets
  • 2 Rubber pads
  • Two 8mm x 16mm socket-head cap screws
  • Two 6mm x 16mm socket-head cap screws
  • Two 6mm x 30mm socket-head cap screws
  • 2 Thick M6 washers
  • 2 Thin M6 washers
  • Two M6 nylon-inset locking-nuts
  • Two 6mm x 40mm studs
  • 2 Hex-keys
  • Installation Instructions


Type: Full range, 2-way Speaker
Color: Black
Waterproof: Yes
Cone Size: 6.5″
Tweeter Size: 1″ /25mm
Outside Grill Diameter: 167mm
Mounting Hole Diameter: 144mm
Mounting Depth: 69.2mm
Impedance: 4 Ohm
Cross-Over: 12dB/octave
Frequency Response: 60Hz – 20kHz
Power (max): 360W (2x 180W)
Power (RMS): 180W (2x 90W)
Grill Material: UV Plastic, 500hrs stable
Basket Material: Aluminum
Cone Material: Complex Fibre
Tweeter Material: Silk Neodymium
Magnet Material: 14.3oz Neodynium
Additional Features: Adjustable Tweeter direction
Accessories: Grills, Mounting Rings & Hardware (all included)
Additional Information

Additional Information

Power Supply 12 Volts
Fit Type Universal fit
System Type Waterproof
Includes Remote Yes
Audio Input Ports 1
Warranty 1 Year Limited
Universal- Requires a 12 volt power source
Installation Information
Requires a 12 volt power source and ground location. Detailed install instructions included.