Subaru Legacy/Outback FactoryConnect Backup Camera for 5"
Now you can add the safety and convenience of a rear camera to your 2012-14 Subaru Outback and Legacy with a 5" factory LCD display. This camera kit is designed to plug directly into your factory 5" screen so no additional monitor is required. Camera will come on automatically when you go to reverse and provide a crystal clear view of your surroundings both day and night.
Camera is our exclusive Super CMOS model with a high grade image sensor, which produces the best color and clarity you will find in an automotive camera system!
- Screen interface cable for Subaru 5" factory display. No cutting of factory screen wires, just plugs right in! *Display screen not included
- High grade OE fit camera with Super CMOS high grade sensor
- Full camera wiring harness
- Hole saw for camera installation
- Wire connectors for tapping camera power
- Super CMOS night vision sensor
- 600 TVL resolution
- .1 LUX night vision
- Selectable parking lines in the display, turn them off on the harness if desired
- 170 degree viewing angle
- 3 year warranty!
Display screen not included as this kit utilizes your existing factory display.
|Vehicle Interface||Includes Factory Integration Module|
|Night Vision||.1 Lux|
|Power Supply||12 Volts|
|Wiring Type||Factory Plug&Play|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Camera Orientation||Rear Facing|
|Fit Type||Factory OE Fit Replacement|
|Connection||Plug and Play to Factory Dash Display|
|Sensor Type||Super CMOS|
|Viewing Angle||170 Degrees|
2012-2014 Subaru Legacy and Outback with factory installed 5" LCD screen
Remove the factory display screen and unplug from factory wiring. Connect included wiring T-harness to the factory radio and connect factory harness to opposite end of T-harness to complete the radio end of the install.
Drill a hole in the panel above your license plate using the included hole saw and install camera in opening. Route harness to front of vehicle, connect RCA to radio interface RCA input, and connect power/ground wires to power and ground source.