2016+ Sierra / Silverado Front & Rear cameras for 7" IOB systems
Here's a complete solution for your 2016+ GM truck with 7"IOB screen that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This is a complete kit that contains our GM tailgate handle rear camera, universal front camera, and IOB 7" integration module.
This camera kit is the perfect solution for those who own a 2016+ GM truck with the 7" IOB screen and want a front and rear view camera. The kit comes complete with OE fit rear camera system, which is our high resolution camera mounted in an OEM GM tailgate handle assembly and universal front camera. Comes with all the wiring and OEM screen integration harness needed to interface directly with your IOB system with no dealer flashing required. This system will also enable the steerable parking guidelines directly into your screen! The rear camera will come on automatically when in reverse and front camera can be set to be triggered by speed or manually activated in settings on your factory screen.
The kit comes with the following:
- OEM GM tailgate handle with our night vision, high resolution camera pre-mounted - 600 lines of resolution
- Full chassis harness
- IOB integration harness and module
- Universal front camera with harness- 600 TVL
- Required mounting hardware/connectors
Cameras have a 3 year warranty. Interface module has a 1 year warranty.
|Vehicle Interface||Includes Factory Integration Module|
|Waterproof/Dustproof Level||IP 67|
|Night Vision||< .2 Lux|
|Power Supply||12 Volts|
|Wiring Type||Hard Wired|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Camera Orientation||Rear Facing|
|Fit Type||Factory OE Fit Replacement|
|Connection||Plug and Play to Factory Dash Display|
|Sensor Type||Super CMOS|
|Viewing Angle||170 Degrees|
|Camera Input Ports||4|
|Reason for Shopping||Adding the camera(s)|
|For a monitor it uses:||Your factory display|
2016-2018 Silverado, Sierra, Colorado, Canyon
IOB systems with a 7" screen
Replace your existing tailgate handle assembly with this assembly, which is preloaded with rear camera. Route the harness to the cab and install the IOB integration module and harness. Front camera mounts to any flat surface and has parking guidelines that can be turned off. You will need to switch it to the forward looking image on the harness during the installation.
NO DEALER ACTIVATION REQUIRED