2014-19 GM Front and Side Camera Kit for 8" Display

In Stock
SKU:
CS-GMLNK-FS
$723.00
 
2014-19 GM Front and Side Camera Kit for 8" Display is available to buy in increments of 1

This is a complete kit that contains our universal front camera, two side cameras with brackets, and a multi-cam integration module for your 8" factory IntelliLink/screen.

Compatible with 2014-2019 GMC trucks with factory 8" MyTouch/IntelliLink screen.
This kit allows you to see what is directly in front of truck and both sides! This kit does not require any splicing into factory wiring and will work on any 2014-19 GM truck with an 8" MyLink/IntelliLink screen . The multi-cam integration module allows for plug and play integration into your factory screen without having the dealer flash program your radio. The factory rear camera will come on automatically when in reverse and front camera will come on when you shift from reverse to drive or you can manually activate it using the factory display.  Factory rear camera not available above speeds of 7mph. The side cameras get installed under your side mirrors to give you a full view of your typical blind spots - all automatically activated using your turn signals! 

Because of the complexity of the side mirror disassembly professional installation is recommended.

Kit includes:

  • Multi-cam interface for your MyLink/IntelliLink 8" factory GM display (display not included)- plug and play and no dealer flashing required!
  • Universal front camera with harness and dual mount brackets
  • Two side cameras with brackets (mount under your side mirrors)
  • Mounting hardware
  • Camera wiring harnesses
  • Zip ties
  • Detailed installation instructions
  • 3 year warranty on the cameras. 1 year warranty on interface

Camera Specifications:

  • CMOS forward looking camera - designed for front applications
  • Side cameras are designed for rear-view applications and can be fully adjusted to meet your view needs
  • 150 degree view
  • 600 TV lines of resolution
  • .2 lux minimum illumination - Outstanding night vision!

 

Multi Cam interface: 

  • Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph or manually using your factory display touchscreen.
  • Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. 
  • Reverse-triggered bed-view/cargo camera. Can also be manually powered on
  • Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
  • Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active.  Doesn't interrupt any factory features!
  • NO DEALER ACTIVATION REQUIRED!

The integration module is completely plug and play with your factory MyLink/IntelliLink system.  Allows connection of four cameras to the factory screen in addition to the OEM backup camera. Also, allows monitoring of any connected camera at any time while driving (not including OEM backup camera).  Right and left blind spot camera inputs are automatically triggered by the turn signals.  Easy to use menus in the factory screen with operation choices.  Factory rear camera is not available above 7 mph.

*Additional cameras and monitor are not included with this kit.  It is designed to work with your existing 8" MyLink/IntelliLink radio screen. This kit allows you to see what is directly in front of the truck as well as beside the truck! These cameras come with a 3 year warranty and the interface module has a 1 year warranty.  Professional installation is recommended.

 Not compatible if vehicle has Rear Seat Entertainment system.

 

 

More Information
SKU CS-GMLNK-FS
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .2 Lux
Power Supply 12 Volts
Number of Cameras 3
Wiring Type Hard Wired
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Front or Rear Facing
Connection Plug and Play to Factory Dash Display
Sensor Type CMOS III
Viewing Angle 150 Degrees
Camera Input Ports 4
Warranty 3 Year
I'm Looking For: Rear Camera
Reason for Shopping Adding the camera(s)
For a monitor it uses: Your factory display
Vehicle must have IO5 or IO6 option code on the service parts sticker located in the glove box OR  2018+ vehicles will have this sticker located in the driver's side door jam by the "B" pillar. You can scan the QR code on the sticker using a mobile device to view the options. 
2014-2019 GMC Sierra pickup truck with 8" IntelliLink display screen.
2014-2019 GMC Canyon pickup truck with 8" IntelliLink display screen.
 
2014-2019 Chevrolet Silverado pickup truck with 8" MyLink display screen.
2014-2019 Chevrolet Colorado pickup truck with 8"  MyLink display screen.
Not compatible if vehicle has Rear Seat Entertainment system.
 

 

 

 

 

The side cameras will mount under your side mirrors, which will require complete removal and disassembly of your mirrors.  These mirrors can be challenging to disassemble so professional installation is recommended for this kit.

Front camera mounts to your license plate bracket or any flat surface and has parking guidelines that can be turned off.  You will need to switch it to the forward looking image on the harness during the installation.

The Multi-cam integration module is plug and play with your factory 8" MyLink/IntelliLink screen.  You will need to remove your factory 8" screen to gain access to the back of the connections. The module will be plug and play and has RCA inputs for the cameras to connect directly to the screen.

 

 

 

 

 

 

Create a review here

  • Write Your Own Question