2017+ Super Duty Universal Front Camera for 4.2" Ford Radios
This kit contains a universal mount front camera with 4.2" Ford radio integration module.
Can't see over that hood? This is your solution and is a Camera Source exclusive for your 2017+ Super Duty with the 4.2" MyFord display!! This CMOS license plate mounted camera kit will allow you to integrate front view safety to your truck. This camera can be converted to mount on any flat surface so you can place it and adjust to obtain an optimum view! All the cables are included and a 25'' long harness terminates with an RCA connection so you can integrate into the included dual camera interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off.
The screen interface provides front camera activation through steering wheel controls or can be manually triggered using a toggle or other triggering device (see below).
Kit is plug and play with factory wiring and does not require any dealer activation.
- CMOS license plate mounted camera- with dual mounting bracket
- Screen interface module for your factory radio (radio not included). Provides multi-camera support for up to 2 total cameras including factory installed or aftermarket rear camera (rear cam not included)
- Mounting hardware
- Camera wiring harness
- Zip ties
- Detailed installation instructions
- 3 year limited camera warranty
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Mirror/Non mirror selectable
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
MyFord 4.2" Multi Cam interface:
- Uses existing 4.2” MyFord factory display (screen not included)
- Allows addition of this front camera that can be manually triggered using your steering wheel controls.
- Pass through for existing factory backup camera
- Press OK button on steering wheel to manually activate front camera, then tap ok button again to go back to normal mode
This kit allows you to see what is directly in front of truck! This camera comes with a 3 year warranty and professional installation is recommended.
|Vehicle Interface||Includes Factory Integration Module|
|Waterproof/Dustproof Level||IP 67|
|Night Vision||.1 Lux|
|Power Supply||12 Volts|
|Number of Cameras||1|
|Wiring Type||Hard Wired|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Camera Orientation||Front Facing|
|Fit Type||Universal fit|
|Connection||Plug and Play to Factory Dash Display|
|Sensor Type||Super CMOS|
|Viewing Angle||170 Degrees|
|Camera Input Ports||2|
|I'm Looking For:||Front Camera|
|Reason for Shopping||Adding the camera(s)|
|For a monitor it uses:||Your factory display|
This kit is compatible with 2017-19 Super Duty trucks with MyFord 4.2" radio.
Install on either your license plate mount or on any flat surface - comes with two brackets. The camera power harness gets run to the included multi-cam interface where all the power, ground, and video connections are made. The multi-camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install.
The instructions walk you through the entire installation process.