Two Universal Cameras, Aftermarket mirror, Dual screen

In Stock
Two Universal Cameras, Aftermarket mirror, Dual screen is available to buy in increments of 1

Adding a backup and front camera to ANY car or truck with a standard wedge mount rear view mirror could never be simpler and more affordable!

 This mirror is a high quality aftermarket rear view mirror with two 4.3" displays.  Connect up to 4 cameras!(2 cams included)

This CMOS universal camera kit will allow you to integrate rear view safety to any vehicle with a license plate and a wedge mount style mirror. In fact, the camera can be converted to mount on any flat surface!  Mount one in front and one in back.  All the cables are included and the 25' long camera harnesses terminate with a RCA connection so you can integrate into the included aftermarket auto dimming rear view mirror. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off. This camera can also be used as a front camera by simply switching it to a forward looking image on the harness during the installation!

Kit includes:

  • (2) Universal mount cameras with harnesses- License plate bracket and universal bracket included.
  • (1) Auto-dimming rear view mirror with dual 4.3" displays


Camera specifications:

  • Mini license bar universal mount camera
  • Super CMOS sensor for ultra clear display (the best available)
  • Resolution: 600 TV lines
  • Minimum Illumination: 0.2 Lux
  • View Angle: 170
  • Video Output: Full color video 
  • Working Voltage: DC 9-16V
  • Parking Line: On/Off switchable
  • Image: Mirror/Non mirror switchable
  • Water proof: IP68
  • 25 foot harness
  • 3 year warranty on the camera

Rear View Mirror (CS-RVMG2) specifications:

  • Auto dimming mirror with (2) 4.3" Color Rear Camera Displays
  • 4 RCA video inputs-Connect up to 4 cameras. (2 included) 
  • Reverse trigger wire that automatically activates screen for rear camera when in reverse
  • Adjustable parking guidelines!  Move the lines around the screen to line them up perfectly for your vehicle
  • Included remote control 
  • Auto-Dimming Feature
  • Display screen is ultra-bright!  See clearly during direct sunlight and screen also automatically dims in the darkness to avoid blinding the driver.
  • Standard Windshield Wedge Mount
  • Not compatible with auto-dimming side mirrors. 
  • 1 year warranty
More Information
Video System NTSC
Vehicle Interface Includes Rearview Mirror
Waterproof/Dustproof Level IP 68 Camera
Night Vision < .2 Lux
Power Supply 12 Volts
Number of Cameras 2
Wiring Type Hard Wired
System Manufacturer Camera Source
Monitor Size 4.3'' Mirror
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Front or Rear Facing
Fit Type Universal fit
Connection Rearview Mirror
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Camera Input Ports 4
Warranty 1 Year
Mirror Mount Wedge Style
I'm Looking For: Rear Camera
Reason for Shopping Adding the camera(s)
For a monitor it uses: Packaged w/Rear view mirror display

This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep. It is recommended to turn off the parking lines on the camera and use the lines in the mirror instead. The lines in the mirror are adjustable for your vehicle!

If your vehicle has auto dimming side mirrors you will lose that feature by adding this rear view mirror.  

Install camera on either your license plate mount or on any flat surface - comes with two brackets. The RCA camera cable will run inside the vehicle to the rear view mirror.  You will need to locate a reverse activated power source, 12v accessory power source and chassis ground.

This camera can also be used as a front camera by simply switching it to a forward looking image on the harness during the installation!

Create a review here

  • Write Your Own Question