2018-2020 F150 OE Style Front Emblem Camera and Force OEM Rear cam

In Stock
SKU:
CS-18FTRFOE-RU
$603.00
 
2018-2020 F150 OE Style Front Emblem Camera and Force OEM Rear cam is available to buy in increments of 1

Add an OE style front emblem camera to your vehicle and view the factory rear camera at any speed!

The front camera in this kit comes pre-mounted in an OEM Ford bracket so it will look like the front camera that comes with the Ford 360 system. Swap out your existing factory emblem for this emblem and housing with a pre-mounted camera.

***Your factory grille must have the camera cutout for this kit to fit properly.  If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit.

*** See images for an example of a grille with camera cutout.  If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership

Force Factory Rear camera: The included camera interface module also allows you to force your factory rear camera on at any speed.  Perfect for towing! 

View Front camera at any time: Perfect for parking!

Navigation unlock:  This interface module allows passenger access to the Navigation menu while vehicle is in motion.  Passenger can enter a destination address on the go!

Camera specifications:

  • OEM style grille mounted camera with our latest super CMOS camera - the latest camera technology!
  • Resolution: 600 TV lines
  • Minimum Illumination: 0.2 Lux
  • View Angle: 170
  • Video Output: Full color video 
  • Working Voltage: DC 9-16V
  • Parking Line: On/Off selectable
  • Image: Forward facing
  • Water proof: IP67
  • 25 foot harness
  • 3 year warranty on the camera
Interface module features:
  • Front Camera composite video input.
  • Composite video input is controlled by the Volume button.
  • Video interface will also enable : Passenger access to Navigation menu while vehicle is in motion.
  • Force OEM Rear Camera at anytime (requires wire splicing).
  • Force Front Camera at anytime.
  • Video Interface is 100% Plug & Play, *OEM Rear camera forcing requires wire splicing.

12 volt Power source included.

No monitor is included with this kit as it is designed to work with your existing factory radio screen.  This camera comes with a 3 year warranty.  Professional installation is recommended.

More Information
SKU CS-18FTRFOE-RU
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision < .2 Lux
Power Supply 12 Volts
Number of Cameras 1
Wiring Type Hard Wired
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Front Facing
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Sensor Brand EVI Systems
Viewing Angle 170 Degrees
Camera Input Ports 1
Warranty 3 Year
I'm Looking For: Front Camera
Reason for Shopping Adding the camera(s)
For a monitor it uses: Your factory display

2018-2020 F150 with SYNC 3 radio and camera cutout in the grille. 

***Your factory grille must have the camera cutout for this kit to fit properly.  If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit.

*** See images for an example of a grille with camera cutout.  If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership.

NOTE:  This camera is pre-mounted into an OEM front Ford emblem.  This kit uses an OEM bracket and cannot be retrofitted to any other application.

The front camera mounts into your factory grille by replacing your existing emblem assembly with this camera assembly.  

Run the harness to the cab and connect to your factory SYNC 3 radio using the included interface. You must remove your factory radio in order to gain access to the wiring, professional installation is recommended.

12 Volt power module connects directly to the battery.  Connect the camera power wire to the 12 volt power module. 

OEM Rear camera forcing requires wire splicing. Detailed instructions included.

Plug the camera RCA into the RCA input on the interface module. 

**Camera wash system not included.  Cover for the opening of where the camera wash system installs is included.

Create a review here

  • Write Your Own Question