2015-18 F150, Surface Mount Front and OEM Tailgate Handle Camera Kit for 4.2" Displays
This is a complete kit that contains an OEM Ford tailgate handle with our premium rear camera pre-mounted, surface mount front camera, and MyFord 4.2 integration module. Compatible with 2015-18 Ford F-150 trucks with factory 4.2" MyFord radio system.
Here's a complete solution for your Ford truck that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This kit does not require any splicing into factory wiring and will work on any 2015-2018 Lariat or XL Ford F-150 with 4.2" MyFord screen. The integration module allows for plug and play integration into your factory screen without having to flash program your radio. The rear camera will come on automatically when in reverse and front camera can be manually activated using the OK button on your steering wheel.
This kit contains the following:
- CS-15FTRH-OEM OEM Rear Tailgate Handle Camera Kit (with removable parking lines)
- CS-FTRFSM Front Camera Kit (with removable parking lines)
- 4.2 integration module (4.2" Ford radio screen not included)
3 year warranty on cameras, 1 year warranty on integration module
|Vehicle Interface||Includes Factory Integration Module|
|Waterproof/Dustproof Level||IP 67|
|Night Vision||.5 Lux|
|Power Supply||12 Volts|
|Number of Cameras||2|
|Wiring Type||Hard Wired|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Fit Type||Factory OE Fit Replacement|
|Connection||Plug and Play to Factory Dash Display|
|Sensor Type||Super CMOS|
|Viewing Angle||160 Degrees|
|Camera Input Ports||2|
|I'm Looking For:||Multiple Cameras (bundled kit)|
|Reason for Shopping||Adding the camera(s)|
|For a monitor it uses:||Your factory display|
2015-2018 F-150 Lariat or XL pickup truck with 4.2" display screen. Front camera is not compatible with the XLT front grille as the camera requires a flat 1"x1" section for mounting that is not tapered or angled up or down. Mounting on the XLT will result in an undesirable camera view due to the upward angle of the cross members in the grille. Contact us for a different front camera style option.
Remove your existing tailgate handle and replace with the new OEM handle with pre-mounted camera.
Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience).
You will need to remove your factory 4.2" screen to gain access to the back of the connections. The module will be plug and play and stubs out to RCA's for the cameras to connect directly to the screen. The interface module powers the cameras (no need to splice into factory wiring) and programs the radio for the cameras.