2015 F150, Surface Mount Front and OEM Tailgate Handle Camera Kit for 8" Displays

In Stock
2015 F150, Surface Mount Front and OEM Tailgate Handle Camera Kit for 8" Displays is available to buy in increments of 1

This is a complete kit that contains an OEM Ford tailgate handle with our premium rear camera pre-mounted, surface mount front camera (black or chrome), and a MyFord Touch 8" SYNC 2 radio multi-camera integration module. (Display not included) Compatible with 2015 Ford F-150 trucks with factory MyFord Touch 8" SYNC 2  radio.

Here's a complete solution for your Ford truck that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This kit does not require any splicing into factory wiring and will work on 2015 Ford trucks with an 8" MyFord Touch SYNC 2 screen . The integration module allows for plug and play integration into your factory screen without having the dealer program your radio. The rear camera will come on automatically when in reverse and front camera will come on when you shift from reverse to drive or you can manually activate it using steering wheel controls. 

This kit contains the following:

  • CS-15FTRH-OEM  OEM Rear Tailgate Handle Camera Kit (with removable parking lines)
  • CS-FTRFSM Front Camera Kit - surface mount camera, easy install and available in black or chrome (removable parking lines)
  • 8" SYNC 2 multi cam interface - connect up to 4 cameras

Rear Camera Specifications:

  • Camera-Source exclusive-Super CMOS chip - outstanding color, contrast, and clarity!
  • 170 degree view
  • 600 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!
  • Backup guidelines (These are the red, yellow, green lines on the screen)

Front Camera Specifications:

  • Super CMOS chip - outstanding color, contrast, and clarity!
  • Forward looking camera - designed for front applications
  • 170 degree view
  • 600 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!

 MyTouch Multi Cam interface: 

  • Uses existing 8” MyFord Touch SYNC 2 factory display -screen not included
  • Allows addition of front camera that can be automatically triggered or manually using your radio power button
  • Shuts off front video at speeds over 7mph.
  • Press power button on radio to manually activate cameras, then tap power button again to toggle between them

Display not included as this kit is intended to connect directly to your factory SYNC 2 display.  Cameras have a 3 year limited warranty!  Interface module comes with a 1 year limited warranty.

More Information
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision .5 Lux
Power Supply 12 Volts
Number of Cameras 2
Wiring Type Hard Wired
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Yes
Fit Type Factory OE Fit Replacement
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Viewing Angle 160 Degrees
Camera Input Ports 4
Warranty 3 Year
I'm Looking For: Multiple Cameras (bundled kit)
Reason for Shopping Adding the camera(s)
For a monitor it uses: Your factory display

2015 model year F150 Lariat or XL with MyFord Touch 8" SYNC 2 radio.

Not compatible with the standard XLT grille at this time due to the upward slope of the grille cross members.  Mounting the camera on the XLT grille will result in undesireable results due to this upward slope. Contact us for different style camera options.








The Multi-cam integration module is plug and play with your factory MyFord Touch 8" SYNC 2 radio.  You will need to remove your factory 8" screen to gain access to the back of the connections. The module will be plug and play and stubs out to a RCA for the camera to connect directly to the screen.  The interface module powers the cameras and also programs the radio.  No cutting of factory wiring and easy programming!

The rear camera kit will replace your factory tailgate handle. Run the harness to the cab and connect to integration module. 

Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience).





Create a review here

  • Write Your Own Question