Watch an overview on how this camera is installed and operates here - https://youtu.be/idOe4dz-Jv4.
UTV's have a terrible blind spot directly behind the vehicle making it difficult to park in the garage or back off the trailer. We now have a camera solution that solves that problem that allows you to connect wirelessly to your mobile device screen (iOS and Android). The cameras can be mounted anywhere, including the front or side of your UTV and it will work on any make and model. Fits UTV license plate bracket!
This kit includes a wifi interface that establishes a wireless hot-spot connection to your mobile device so you don't have to connect any wires to your mobile device. You can keep the camera display on at all times or launch the camera anytime using the included mobile application. Android users can even wire a toggle switch to the wifi-module that will auto-launch the mobile app for a camera view at the flip of a switch. (iOS doesn't allow apps to auto-launch).
This kit includes:
- (2) Super CMOS camera(can be forward or rear facing)
- (2) Mini-mount brackets system for simple mounting
- (2) 15 foot Wire harnesses (12v)
- Wifi Interface Module and mobile application
- Zip ties and wire connectors
- Velcro for wifi interface mounting
- iPad NOT INCLUDED this system connects to your iPad or Android tablet/phone
NOTES: NO MONITOR IS INCLUDED WITH THIS KIT. Wifi interface module is not waterproof and must be mounted in a glove box or other dry location.
- Additional Information
SKU CS-UTV-WIFI-2 Waterproof/Dustproof Level IP67 Night Vision < .2 Lux Power Supply 12 Volts Number of Cameras 2 Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Camera Resolution 600 TVL Parking Guidelines Selectable on/off Camera Orientation Front or Rear Facing Sensor Type Super CMOS Viewing Angle 170 Degrees Camera Input Ports 2 Warranty 3 Year Limited
Requires a 12 volt power source to operate.
UTV Camera is compatible with:
Polaris: RZR, Ranger, General
Can-Am: Maverick, Defender, Commander
Arctic Cat: Prowler, HDX, Wildcat
Yamaha: Wolverine, YXZ
Kawasaki: Mule, Teryx
John Deere: Gator, RSX
- Installation Information
Mount the camera anywhere and route the camera wire harness to the wifi integration module. Next wire the wifi integration module harness to 12v accessory, ground, and the trigger wire to a toggle or directly to 12v accessory (if you want the camera on all the time). The toggle switch is used to activate the camera and mobile app by flipping the switch, iOS users must manually launch the mobile app to view the camera so wiring the trigger wire to accessory with the toggle switch is typical.
Mobile device mounts sold separately see our UTV camera category on our website for options.
- Q & A
Q: How do I access the cameras?A: Android users- activate the cameras and mobile app by flipping the toggle switch. iOS users- Must manually launch the mobile app, so you will want the camera powered and ready to go when the app is opened.