This kit displays the bed camera on the factory display radio (please see notes below and application guide for fitment). This is a trim bezel with premounted camera that fits behind your factory 3rd brake light and adds the rear camera convenience to the top of your cab! Now you can see your fifth wheel or anything else that is inside your bed without having to have a spotter guiding you for trailer connections etc. Brake light functions like factory and the camera connects to the included screen integration module, which allows this 3rd light cam, two side cameras, and a front camera to be connected to your factory radio simultaneously.
Some notes about this integration kit:
- Kit includes an interface module that allows multiple cameras to connect to the factory SYNC 2 8" radio. This 3rd light camera will be activated automatically when in reverse, front camera automtatically below 7 mph, and side cameras can be added and activated using turn signal. Cameras can also be activated manually
- THIS KIT WILL NOT WORK IF YOU HAVE A TAILGATE CAMERA. Only 1 rear view camera can be activated with this kit.
- Integration module is plug and play, no dealer programming necessary.
- 3rd brake light trim bezel with premounted camera
- HD CMOS, high resolution color and night vision
- Adjustable view, swivel head allows you to aim the camera where needed
- 500 TV Lines of resolution
- 150 degree view
- <.2 LUX night vision
- 3 Year warranty
- Additional Information
SKU CS-FTR3LSD-VI Vehicle Interface Includes Factory Integration Module Waterproof/Dustproof Level IP67 Night Vision < .2 Lux Power Supply 12 Volts Wiring Type Hard Wired Full Harness System Manufacturer EVI Systems Camera Resolution 500 TVL Camera Orientation Rear Facing Fit Type Factory OE Fit Replacement Connection RCA with opt. Factory Interface Sensor Type CMOS Sensor Brand EVI Systems Viewing Angle 150 Degrees Warranty 3 Year Limited
2013-2016 Ford Super Duty trucks with factory 8" screen. THIS KIT WILL NOT WORK IF YOU HAVE A TAILGATE CAMERA. Only 1 rear view camera can be activated with this kit. If you have a factory rear camera you need one of our other kits please see our catalog or call with questions.
- Installation Information
Remove your factory 3rd brake light and replace with this kit. Remove the radio and install the integration module into the factory wiring, this part is plug and play. Route the camera wiring harness to the integration module and make power/video connections at the integration module. Turn on ignition and radio will be programmed.
NOTE: If you intend to add 2 side cameras with this kit you will need to splice into the factory turn signal circuit for side camera automatic activation.