This harness will allow you to quickly remove a trailer or other removable component with backup camera.
Quickly remove your fifth wheel, trailer, farm machinery, or anything else that requires the camera to be disconnected at the hitch. Heavy duty coil harness locks into matching recepticals on both ends. Screw type locking connectors are a perfect match for all our commercial camera systems. Coil extends to more than 10ft!
NOTE: This kit can handle THREE cameras. This harness is designed to run from inside the cab all the way to the rear bumper, then there is a single coil harness that connects to the included trailer pigtail - approximately 30' long. The harness has two connectors inside the cab that funnel into one single cable that routes along the chassis to the rear bumper where it goes into the socket with spring loaded lid. The trailer end is a short pigtail that takes 3 camera connections and combines it into the single socket for the coil connector.
- HD coil harness with screw type 4 pin locking connectors on both ends. This is the large coil cable that connects the truck end to the trailer end.
- Truck/Tractor vehicle harness integrated into 30' of cable, spring loaded flip lid on the coil connector side allows the socket to stay free of moisture and dust when not in use
- Trailer pigtail, splits the single socket back into two cable inputs. 3 additional cables are necessary to route to your cameras so please choose desired length when ordering your cameras
Warranty Information All Camera Source commercial products include a standard 1 year warranty unless otherwise specified in the item description. Simply return the item and it will be repaired or replaced! Note that some issues can be resolved over the phone or email so please contact us first.
- Additional Information
SKU CS-UTQC3 System Manufacturer EVI Systems Connection Commercial 4 Pin Coax Warranty 1 Year Limited
Compatible with any of our commercial cameras with 4 pin locking connectors.
- Installation Information
There are three components to this kit; two camera cable connectors and the coiled harness. The camera cable connectors have a locking 4 pin connection on one end that attaches to your camera cable and a female receptacle on the other end where the coiled harness plugs into. This is similar to your trailer harness receptacle in the rear bumper of your truck with a spring loaded lid to protect the connector when not in use. Coiled harness simple pushes into the receptacle and locks into place by a tab on the spring loaded lid - very simple to install!