2014-15 GM Truck Salt Spreader/Camper Camera Kit

In Stock
2014-15 GM Truck Salt Spreader/Camper Camera Kit is available to buy in increments of 1

This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this heavy duty commercial camera - PLUG AND PLAY!


Use this camera for salt spreaders, bed campers, 5th wheel applications, airstream tailgates, and any other application where you are required to remove your factory tailgate. Simply mount the camera on any surface and run the coax cable to your factory backup camera connection for a simple and seamless installation. The coaxial cable can be ordered in three sizes - 16', 32' or 64', Selectable from this product page.  


Kit includes the following:

  • CCD heavy duty commercial camera
  • 10' (standard), 16', 32' or 64' (optional) coaxial wire harness with weather tight connectors
  • Camera pigtail harness, which adapts to the factory connectors for plug and play with your existing wiring (6 pin factory connector) - no cutting or splicing!
  • One year warranty!

Camera Specifications:

  • 1/3" Sony CCD w/ 700 TV lines of resolution
  • 19 infra-red LED's that will create a daytime like display even in complete darkness
  • 150 degree view 
  • 0 lux (no light required to operate)
  • Heavy cast casing, steel mounting bracket
  • Locking weather tight connectors
  • Plug and play GM connector connects behind rear bumper using same plug as factory camera
More Information
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision 0 Lux
Power Supply 12 Volts
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Camera Resolution 700 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type CCD
Sensor Brand Sony
Viewing Angle 150 Degrees
Warranty 1 Year
I'm Looking For: Rear camera
For a monitor it uses: Your factory display

2014-15 IntelliLink Chevy Silverado, GMC Sierra, Denali, and HD trucks with factory installed backup camera.



YOU MUST CONFIRM THE YELLOW WIRE IN YOUR CURRENT CAMERA HARNESS! Contact us if you don't have the yellow wire.

Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required! Camera connector plugs directly into the factory camera connector behind the rear bumper.
Create a review here

  • Write Your Own Question