Multi-Camera Interface for 8" Ford Factory SYNC 3- Version 2.1 and below

Adds Multi-Cam Support to 8" SYNC 3 Version 2.1 and below

SKU: CS-FRD8MC-S321

Regular Price: $624.00

Special Price $275.00

Regular Price: $624.00

Special Price $275.00

OR

Email to a Friend

Description

Details

CLOSEOUT PRICING!  SAVE BIG! 

Important: Check your SYNC 3 software version before ordering!  This module is for SYNC 3 software version 2.1 and below only!  See Compatibility and Q & A tabs for more details. 

This Rostra 250-8452 multi camera interface allows users to integrate to an existing rear view camera, or add a rear camera if vehicle doesn't have one. Also, add a front and/or side cameras, all integrated into the 8” factory display with SYNC 3 Version 2.1 and below . Using this interface module, combined with a rear view camera and front or side cameras (not included) provides the driver with a complete, unobstructed view of what’s around the vehicle displayed on the existing 8” SYNC 3 factory display.

 

The integration module is completely plug and play with your factory SYNC 3 Version 2.1 and below system.  Allows connection of four cameras to the factory screen in addition to the OEM backup camera. Also, allows monitoring of any connected camera at any time while driving (not including OEM backup camera).  Right and left blind spot camera inputs are automatically triggered by the turn signals.  Easy to use menus in the factory screen with operation choices such as English, French, or Spanish language. Factory rear camera is not available above 7 mph.

Features:

  • Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph or manually with along press of the momentary button (included)
  • Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. 
  • Reverse-triggered bed-view/cargo camera. Can also be manually powered on
  • Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
  • Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active.  Doesn't interrupt any factory features!
NO DEALER ACTIVATION REQUIRED!

Kit Includes:

  • SYNC 3 Multi-Cam interface module for software Version 2.1 and below.
  • Install instructions
  • CAMERAS AND DISPLAY RADIO NOT INCLUDED
NOTE: The 250-8452 Rostra module is only compatible with SYNC version 2.1 and below. Please ensure that your auto-update feature is turned off so that the truck does not install a new SYNC version.  Does the dealer update the radio during a service appointment? If so, it's important to specifically tell them that you don't want the update unless you have personally checked compatibility with your specific Rostra interface hardware.
If your system updates to a newer version of SYNC 3 it will not be compatible with this module and it will not be covered under warranty.  If the module has been installed, it cannot be exchanged. 
This interface kit comes with a 3 year warranty.  

If you have SYNC 3 Version 2.2 see SKU: CS-FRD8MC-S322

Additional Information

Additional Information

SKU CS-FRD8MC-S321
Vehicle Interface Includes Factory Integration Module
Wiring Type Factory Plug&Play
System Manufacturer Rostra
Connection Plug and Play to Factory Dash Display
Camera Input Ports 4
Warranty 3 Year Limited
Compatibility

This kit is compatible with select Ford 8” SYNC 3 factory displays. Only compatible with SYNC 3 software versions 2.1 and below.

-2016-2017 Ford F-Series trucks. F150, F250, F350, F450, F550

-2016-2017 Ford Explorer

-2016-2017 Ford Edge

The 250-8452 Rostra module is only compatible with SYNC 3 version 2.1 and below. Please ensure that your auto-update feature is turned off so that the truck does not install a new SYNC version.  Does the dealer update the radio during a service appointment? If so, it's important to specifically tell them that you don't want the update unless you have personally checked compatibility with your specific Rostra interface hardware.
If your system updates to a newer version of SYNC 3 it will not be compatible with this module and it will not be covered under warranty.  If the module has been installed, it cannot be exchanged. 

You must confirm your SYNC 3 version before ordering!  Follow the steps below to determine which software version you have.

1. Power on the vehicle so that the SYNC 3 system is fully operational.

2. Tap the "Settings" icon in the lower right-hand corner of the screen and choose "General"

3. Use the scroll bar on the right to scroll down to the "About SYNC" option.

4. Note which version of the SYNC 3 software is presently installed on the vehicle.

5. Choose the correct version from the dropdown menu when ordering.  There are two different modules:  One for vehicles with Software Version 2.1 or below and one for Software Version 2.2.

If you have software version 2.2 you will want SKU: CS-FRD8MC-S322

Installation Information

This kit connects up to 4 cameras to your factory 8" SYNC 3 radio with software versions 2.1 and below,  all plug and play - no cutting of factory wires! The interface module plugs into the back of your factory navigation screen. The instructions walk you through the entire installation process.  

Q & A

Q: Why is it important to confirm the SYNC 3 software version?

A:  This interface module is for SYNC 3 version 2.1 and below only.  Make sure you have the correct module for your vehicle by confirming the SYNC 3 software version. 

1. Power on the vehicle so that the SYNC 3 system is fully operational.
2. Tap the "Settings" icon in the lower right-hand corner of the screen and choose "General"
3. Use the scroll bar on the right to scroll down to the "About SYNC" option.
4. Note which version of the SYNC 3 software is presently installed on the vehicle.
5. Confirm you’ve purchased the correct module.
Unfortunately the 250-8452 Rostra module is only compatible with SYNC version 2.1 and below. Please ensure that your auto-update feature is turned off so that the truck does not install a new SYNC version.  Does the dealer update the radio during a service appointment? If so, it's important to specifically tell them that you don't want the update unless you have personally checked compatibility with your specific Rostra interface hardware.
If your system updates to a newer version of SYNC 3 it will not be compatible with this module and it will not be covered under warranty.  If the module has been installed, it cannot be exchanged.