Multi-Camera Interface for 8" Ford Factory SYNC 3

Adds Multi-Cam Support to 8" SYNC 3 Displays



Email to a Friend



This multi camera interface allows users to integrate to an existing rear view camera, or add a rear camera if vehicle doesn't have one. Also, add a front and/or side cameras, all integrated into the 8” factory display with SYNC 3 . Using this interface module, combined with a rear view camera and front or side cameras (not included) provides the driver with a complete, unobstructed view of what’s around the vehicle displayed on the existing 8” SYNC 3 factory display.

The integration module is completely plug and play with your factory SYNC 3 system.  Allows connection of four cameras to the factory screen in addition to the OEM backup camera. Also, allows monitoring of any connected camera at any time while driving (not including OEM backup camera).  Right and left blind spot camera inputs are automatically triggered by the turn signals.  Easy to use menus in the factory screen with operation choices. Factory rear camera is not available above 7 mph.


  • Front facing camera can be triggered to power on automatically when the vehicle is going less than 10 mph(shuts off at 2-3mph) or manually using your factory display touchscreen.
  • Turn signal activated mirror mount cameras can also be powered on manually via the touch screen's Camera icon. (cams not included) 
  • Reverse-triggered bed-view/cargo camera. Can also be manually powered on. (cam not included)
  • Mobile device screen sharing-HDMI input allows mirroring of Android or iOS device's screen directly to the dash of the vehicle while the USB port also provides charging of the device. Audio from the device streams via the vehicle's Bluetooth system.
  • Radio volume and A/C controls are available on-screen even when video from a camera or mobile device is active.  Doesn't interrupt any factory features!
Kit Includes:
  • SYNC 3 Multi-Cam interface module
  • 12 Volt power module
  • Install instructions


 This interface kit comes with a 1 year warranty.  


Additional Information

Additional Information

Vehicle Interface Includes Factory Integration Module
Wiring Type Factory Plug&Play
System Manufacturer EVI Systems
Connection Plug and Play to Factory Dash Display
Camera Input Ports 4
Warranty 1 Year Limited

This kit is compatible with vehicles that have a Ford 8” SYNC 3 factory display.

Installation Information

This kit connects up to 4 cameras to your factory 8" SYNC 3 radio, all plug and play - no cutting of factory wires! The interface module plugs into the back of your factory navigation screen. The instructions walk you through the entire installation process.

Connect 12 volt power module directly to the battery and connect all camera power wires directly to the module.